On Wednesday, November 20, 2013 1:56:55 PM UTC+1, Mike Bremford wrote: > > Finally found the required changes to get UART1, 2, 4 and 5 loaded and > numbered correctly under 3.12. > > The source for the "capes" I was looking for (BB-UARTn) were created by > this patch: > https://github.com/beagleboard/kernel/blob/3.8/patches/not-capebus/0176-capes-Add-virtual-capes-serving-as-examples.patch, > > and it looks like the RS232 cape would need the same change. The file isn't > in the 3.12 branch and I don't speak git so I've attached a patch for this > patch (sorry) which fixes the UART and RS232 overlays. > > If anyone just needs working DTS and DTBO files for BB-UART1, BB-UART2, > BB-UART4 and BB-UART5 for kernel 3.12, I'm attaching them here as well in > bb-uart-dts-312.tar.gz > > Just to confirm that all UARTs appear as expected on my BBB Rev. A5C running Robert's Ubuntu 13.04 image with kernel 3.12.0-bone8.
I've tried the RX signals (with a GPS board), they all work apart from, for some reason, UART5/RX (P9/38). Not sure what the issue is there. Thanks again, best, -Bert -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
