http://www.elinux.org/Beagleboard:BeagleBoneBlack
Section 10.1 Gerald On Wed, Nov 20, 2013 at 5:12 PM, Sean Nored <[email protected]> wrote: > So we're working on our senior design project - I won't bore you with the > details, but we're using Beaglebone Black to communicate serially with a > laser. > > On to our problem, we've been using them for a while and were working on > the serial stuff, when it froze and we had to remove the power to restart > it. When we plugged it back in, we got the starting beaglebone bar at the > top of the screen...but it never fully turned on. When we reset it again, > it would no longer display anything. > > When ever we apply power now, the 3 user LEDs come on and the power LED > comes on...then it just sits there. No output on the monitor at all. Any > suggestions on how to fix this? We are new to BeagleBoards, so anything at > all would be greatly appreciated! > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
