On Wed, Nov 20, 2013 at 7:05 PM, Robert Nelson <[email protected]> wrote: > On Wed, Nov 20, 2013 at 6:54 PM, Bill Dussault <[email protected]> > wrote: >> I attempted to flash the board with a scan disc card using the 5v power >> adapter with a 1amp output. And IT STILL DOES NOT WORK. I tired with the >> image given and nothing still >> The BBB is a piece of junk! >> >> What else could I possibly do?? > > Well lets start with the basic's.. How many LED's are light (the 4 > next to the ethernet connector..) and what are they doing? > > Please verify, the procedure you followed.. > > 1: Power/USB unplugged > 2: Insert microSD card > 3: Push & Hold Boot button > 4: Insert Power > 5: Watch LED's, when all 4 are lite. 6: Let go of Boot Button.. > 7: Wait 5-6 Minutes, solid 4 LED's are lite when complete..
(small correction..) Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
