You must power the board off. Pull the power. Press the boot button and then apply power.
You need to make sure the image is a flashing image, one that copies the files to the eMMC if you want to copy it to the eMMC. Gerald On Thu, Nov 21, 2013 at 12:29 PM, Robson Pereira < [email protected]> wrote: > Good afternoon, > > We have the BeagleBone Black (BBB) board and we are trying to change the > OS of eMMC. > > We found to images for the BBB board, one is a Debian image and the > other is an Ubuntu image. > > First, by pressing Power Button (S3) and BOOT switch (S2) for 10 seconds > after power on, the Debian image uploaded (quickly) to eMMC and loaded, > checked by SSH connection. > > To change to Ubuntu image, following the same procedure above, we left > the BBB running after the status LEDs starts to blink randomly. After > about 3 hours, we checked and the BBB board still boot by the Debian. > > Please, could you tell us what's wrong? > > Best regards, > > Robson Pereira > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
