How can I access the register of processor to implement the mode change described in TI AM335x ARM A8 Microprocessors technical reference manual
Disable the UART before accessing the UARTi.UART_DLL and UARTi.UART_DLH registers: Set the UART_MDR1[2:0] MODE_SELECT bit field to 0x7. Please Help On Friday, 22 November 2013 11:47:10 UTC+1, Andrei wrote: > > Hello > > IS there is possibility to change the UART mode? according to the > datasheet from TI *AM335x ARM Cortex –A8 *Microprocessor's > micro-controller UART's have following modes available. > Value Mode > 0x0: UART 16x mode > 0x1: SIR mode > 0x2: UART 16x auto-baud > 0x3: UART 13x mode > 0x4: MIR mode > 0x5: FIR mode > 0x6: CIR mode > > At the moment when I try to send data over TxD I can read the wrong values > on the Oscilloscope, so I guess I need to change the mode and see what > happens then. But I don't know how. Please help. > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
