From: Vikrant8051 <[email protected]> Reply-To: <[email protected]> Date: Friday, November 22, 2013 at 11:32 AM To: <[email protected]> Subject: [beagleboard] is Bafo BF-810 is compatible for Beaglebone Black serial debug pins ?
> I have Bafo Bf-810 cable.Can I use it as serial debug wire for Beaglebone > Black ? > That means using only GND,RX,TX wires only for connection .Aren't these pins > connection > destroy 3.3v compatible pins on Beaglebone Black ? This won¹t work as the RX and TX lines are +- 12V. You need a 3.3Volt TTL adapter like the one recommended in the Beaglebone System Reference Manual. > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
