I can be wrong. But do not exists support to li-5m03 camera from 3.11.x kernel. The support is ended with 3.9.x kernel.
2013/11/21 Nizamov Shawkat <[email protected]> > I have measured supply voltages for the older 3.8 kernel and newer 3.12. > > So, in 3.8 both VAUX4 and VAUX3 outputs are at 1.8V which is correct. > With 3.12 I see zero at VAUX4 (IO voltage - not a surprise that I do not > see mt9p031 on i2c bus) and 2.8V at VAUX3 (it is over the limits for the > sensor chip - should be 1.8V, but mt9p031 is not blown). Now I want to > apply correct voltages for these outputs but literally being lost in device > tree / platform data and so on. Does anyone have suggestions what and where > should I patch? > > Best regards, > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
