The file (uEnv.txt) was created and the contents of it say just this: console=ttyO2,9600n8
There is nothing else in that file. After I rebooted with this file in place it is still not passing traffic through minicom to a Junpier NS5GT and back. On Tuesday, November 26, 2013 10:39:07 AM UTC-8, Brian Mundell wrote: > > I looked to see if i could find that file for numerous hours.......... It > was not there. Should it be created, then edited to have what I need in it? > > On Monday, November 25, 2013 3:10:06 PM UTC-8, RobertCNelson wrote: >> >> On Mon, Nov 25, 2013 at 4:07 PM, Brian Mundell <[email protected]> >> wrote: >> > I'm trying to pass console info of ttyO2 to match my jumper >> settings/baud >> > 9600 on a RS232 cape, but my kernel says: >> > >> > dmesg | grep tty >> > [ 0.000000] Kernel command line: console=ttyO0,115200n8 fixrtc >> > root=/dev/mmcblk1p2 ... >> > >> > As I understand in Angstrom, I would pass my boot args for console as >> > /media/BEAGLEBONE/uEnv.txt or some such, how do I do this in Debian >> Wheezy? >> >> uEnv.txt on the boot partition... /boot/uboot/uEnv.txt when running the >> system.. >> >> Regards, >> >> >> -- >> Robert Nelson >> http://www.rcn-ee.com/<http://www.google.com/url?q=http%3A%2F%2Fwww.rcn-ee.com%2F&sa=D&sntz=1&usg=AFQjCNGOHCXJQaZwU-JxxDUh5l2sPHvC9w> >> >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
