Hello, I have some issues with a Usb Audio Dongle (COnrad) in Beaglebone Black.
1. I connect the Usb Audio Dongle in the BBB. 2. I run "speaker-test default:Dongle -t sine" to output audio from the dongle. 3. While the program runs, I hear the audio only in the first period. I don't hear the rest periods, although there is optical indication (LED light) that the dongle is operating. 4. I stop the program with Ctrl+C and when I run the above command again, it shows this error: *root@beaglebone:~# speaker-test -D default:Dongle -t sinespeaker-test 1.0.25Playback device is default:DongleStream parameters are 48000Hz, S16_LE, 1 channelsSine wave rate is 440.0000HzRate set to 48000Hz (requested 48000Hz)Buffer size range from 96 to 262144Period size range from 48 to 131072Using max buffer size 262144Periods = 4Unable to set hw params for playback: Input/output errorSetting of hwparams failed: Input/output error* I have to remove and place back the dongle, in order to retest. Any ideas? Thank you, Maria -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
