I have no such list. I suggest you look at Spectrum Digital and Blackhawk. Whether they work or not has nothing to do with the BBB. It has to do with the processor. So, check compatibility with the processor and make sure you have an adapter, pin out and voltage, for the header used on BBB.
Gerald On Tue, Nov 26, 2013 at 6:15 PM, John Syne <[email protected]> wrote: > > From: <[email protected]> > Reply-To: <[email protected]> > Date: Monday, November 25, 2013 at 12:48 PM > To: <[email protected]> > Subject: Re: [beagleboard] Programming BBB A5C using TI CCS 5.5.0 > > Thanks Gerald. Is there a list of JTAG emulators which would work with > BBB and CCS? > > > > > Probably the most cost effective is USB100V2 or XDS100V2. Search on Google > for a list of suppliers. > Regards, > John > > > > On Monday, November 25, 2013 2:08:39 PM UTC-5, Gerald wrote: >> >> BBB requires an external JTAG emulator. >> >> Gerald >> >> >> >> On Mon, Nov 25, 2013 at 12:50 PM, <[email protected]> wrote: >> >>> Hi, >>> >>> I have a beginners question related to the Beaglebone Black and >>> programming using TI's Code Composer Studio v5.5.0. In the past I have >>> programmed MicroChip PIC controllers which require a JTAG connection to the >>> chip. I have also used MicroChip development boards which allow for JTAG >>> emulation over a USB connection. My assumption for the BBB was that it >>> would work the same way and not require an external JTAG interface product. >>> If this correct or not? >>> >>> Thanks >>> >>> -- >>> For more options, visit >>> http://beagleboard.org/discuss<http://www.google.com/url?q=http%3A%2F%2Fbeagleboard.org%2Fdiscuss&sa=D&sntz=1&usg=AFQjCNEpMSpbklk_hXqEMMJhBr1sf-iMfQ> >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
