If you're getting nothing then you likely have the device connected improperly. View this image to make sure you have it connected properly.
https://lh4.googleusercontent.com/-3oca40vrH-g/Ubd5TjD-0_I/AAAAAAAAALU/-GibZBaTvKk/s1024/beaglebone-black-serial.jpg On Fri, Nov 29, 2013 at 7:37 AM, Gerald Coley <[email protected]>wrote: > Is the bud rate set correctly? > http://www.elinux.org/Beagleboard:BeagleBone_Black_Serial > > Gerald > > > On Thu, Nov 28, 2013 at 4:08 AM, <[email protected]> wrote: > >> I am using following usb to serial module to debug >> http://dx.com/p/pl2303hx-usb-to-ttl-converter-module-149859 >> >> but I am not able to get data properly, I tried same to get serial data >> from arudino and it worked fine. Please help I am not getting anything when >> connecting to bbb. >> >> I am using CoolTerm mac app to connect to serial and get data. >> >> Thanks >> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
