Hello all. First off, I'd like to thank the community for their continuing help!
I'm trying to get understanding on many things at once here, so I'm going to fire off a series of questions. Please bear with me here :) 1. What is the best way of enabling uart1, 4 and 5, i2c1 and 2 and spi1? I understand I have to modify dtb files. Any tutorials on doing that on ubuntu? 2. Where is uart3_rxd? 3. I'd like to connect the gps to uart5, but those pins are used by the boot config. What are the consideration there? 4. If I do ls /dev there are a bunch of tty devices, how do I know which one is what? I'm googling how to enable uarts on bbb and I'm seeing the references to tty0xx. No such thing in /dev, even for the uart0 that is enabled. 5. Also, if I'm connected to bbb via serial on j1 and I also telnet to it and do echo "hi" > tty, shouldn't I see "hi" on the serial terminal? I'm using ubuntu-13.04-minimal-armhf-2013-08-25 and Robert C Nelson's 3.12.3-bone9 kernel. Thanks and best regards, Miro -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
