The connectors are 2.54 spaced pin to pin and 2.54 spaced from row to row. https://github.com/CircuitCo/BeagleBone-Black-RevA5C/blob/master/BBB_BOM.xls?raw=true
I do not know of any 46 pin ribbon male ribbon cables, but I have not really spent anytime looking for them. Gerald On Sat, Dec 7, 2013 at 8:28 PM, Sika <[email protected]> wrote: > Hi All > > I want to attach both the P8 and P9 headers to ribbon cables and connect > these to a separate PCB (Through hole on a vero board actually) > I'm intending to get 2 female connectors (with through-hole pins...for the > vero board), ribbon cable, 4 male connectors. > The array of connectors available is bewildering to me. So this question > may or may not be expert -- but > probably is not something a beginner wants to do. > > Question 1. > Are these headers 2.54 mm on the pins, and 1.27 mm pitch on the rows? > > Qestion 2. can you point me towards a supplier with a decent searchable > range of these things that would suit, or > better still recommend a range of connectors to suit? > > > > Thanks for your help. > > > Kind regards > > Matt > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
