I would like to get some ideas on how to best accomplish the following system i want to create. I have a box that has 5 temp sensors, 6x PWM fans, gyroscope, key switch. 3 x Driver that gives out A and V. Then i have a remote that can be up to 100m with wire or wireless away to set these sensors, show the graphs. The remote would feature a 7inch touch display.
My plan was to use a fubino on the box side and a beagle bone black on the remote and have them communicate (how because the distance of the remote and box). Better would be if i could use the beaglebone black in the box and just the screen on the remote, if that is possible (but how would i communicate with the beaglebone black and display over the long distance). Please advise what would work best. I could also use 2 beaglebone black if necessary. Any advise and suggestion are welcome. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
