The board does not ship with the Sitara SDK. You would need to install that to use the instructions you are trying to use.
Gerald On Mon, Dec 16, 2013 at 1:53 PM, <[email protected]> wrote: > I bought a BeagleBone Development Board from TI eStare (Order Number is > 258705) on 7/31/2013. > > From Sitara Linux Software Developer’s Guide I found the following: > When Beaglebone boots, a START_HERE directory will display on your Linux > host desktop. > To start your evalaution and development using the BeagleBone, Run the > START_HERE.sh script. > > I tried to follow the above instruction. > The Host PC OS is Ubuntu 12.04.1 LTS. > I use the following command from a Ubuntu terminal to connect Beaglebone > to the host: > sudo screen /dev/ttyUSB1 115200. > Then I can see the BeagleBone boots, then I can login to root. > At the same time I can see a BEAGLE_BONE directory display on Ubuntu > desktop. > However, I can never see a START_HERE directory. > Of course, there is no START_HERE.sh script either. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
