AFAIK the TiWi-BLE cape is incompatible with the BeagleBone Black: http://elinux.org/Beagleboard:BeagleBone_Black_Capes#Chart http://beagleboardtoys.info/index.php?title=BeagleBone_TiWi-5E_w/_EXT._Antenna
>From the circuitco page: *Note: Hardware incompatible and will damage BeagleBone Black if used together.* I took heed and haven't actually tried one of these capes myself, thought you might appreciate a heads up. Ian On Monday, December 16, 2013 7:43:53 AM UTC-8, LanonX wrote: > > > <https://lh6.googleusercontent.com/-eAdJwscT1F8/Uq8dwVAd0pI/AAAAAAAAEYA/d0nNV81htgE/s1600/20131216_161537.jpg> > Hi everyone, > > Hi have recently buyed beaglebone black with a wifi cape de TiWi-BLE but i > can't make it work. > > The problem is that, when i put the wifi cape on it, the beaglebone dont > boot up and as can you see on the picture above, the lights are always on. > > Also de light on the beaglebone is just the USR2. > > I have tried just connecting the DC power and the LAN cable but its > happens the same. > > In the picture the beaglebone is connected with DC power and also LAN > cable. > > Can you tell me what could be the problem? > > Thanks to all. > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
