Did you check to see if your time/date were set right? The ntp was not setup right last time I did one and I could see my network but the network didn't like me.
On Sunday, December 15, 2013 3:36:23 PM UTC-6, fabrguer wrote: > > Hi, I'm using BBB with Angstrom 3.8.13 and the Edimax EW-7811Un USB > adapter. > > I believe I got wifi to work as this is what I get with ifconfig: > > # ifconfig wlan0 > wlan0 Link encap:Ethernet HWaddr 80:1F:02:BE:EF:CE > inet addr:192.168.1.21 Bcast:192.168.1.255 Mask:255.255.255.0 > inet6 addr: fe80::821f:2ff:febe:efce/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:24 errors:0 dropped:0 overruns:0 frame:0 > TX packets:51 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:3859 (3.7 KiB) TX bytes:10249 (10.0 KiB) > > plus if I ping the IP (from the BBB terminal after accessing via USB) I > get positive feedback. > > However, here is (at least for me) the interesting thing: if I try to ping > from my Mac (on the same subnet) I don't get return... Needless to say, if > I try to ssh the IP address it does not work as well... What's going on? > From BBB's point of view I would say that I'm connected, but this does not > seem true when I try to access from the Mac. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
