Good Afternoon, I am developing an application for communicating with the BBB using sockets via the onboard ethernet port.
The strange part is, my client(pc)/server(BBB) application communicated perfectly the first time I ran it, but when I rebooted the BBB, it could not establish an ethernet connection. I tried pinging the IP given by running "ifconfig" on the BBB 169.254.40.43, but it never replied I also tried changing to a static IP (192.168.1.80) via this post " http://derekmolloy.ie/set-ip-address-to-be-static-on-the-beaglebone-black/"; but I still could not connect. Finally, I tried this on two different BBB's one with stock angstrom, one with the newest flash image. Neither could connect. I did not change to static IP on the stock BBB. I can still connect to usb0, via 192.168.7.2 no problem. In fact I only had a problem with this when I changed eth0 to use static ip 192.168.7.80, somehow this interfered with the 192.168.7.2 IP of usb0 and would not let me ssh into the BBB Please let me know if I am missing something, I tried rebooting many times and turning eth0 on and off, but I could never establish a connection to it since. Thank you, -Dmit -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
