I just wanted to better document the problems. Some of them: If I put USB modem Huawei 3772 direct into the USB connector it flashes and then the power is cut off If I put a USB hub between the same, but if I put another device into the hub everything is OK and I manage to work with the modem
I will put a list and screen captures wit dmesg later -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Robert Nelson Sent: Friday, December 20, 2013 3:46 PM To: Beagle Board Subject: Re: [beagleboard] CPU freq On Fri, Dec 20, 2013 at 5:43 AM, Bogdan Teodorescu <[email protected]> wrote: > I know > > But I want to be done automatically at start-up. /etc/default/cpufrequtils https://wiki.debian.org/HowTo/CpuFrequencyScaling > Because of poor power management I also have some USB problems > > I will post later. Uh, so why don't you post the details now? > > Now I look at differences between Angstrom and Ubuntu. > > Angstrom does a far better job with power management and USB devices > but does not have some devices files for USB G3 modem and RS 232/USB > adapters I must use. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
