Terry et all: I am having the same issue with Wheezy and an LCD7. Sometimes it takes a touch and often it ignores the touch with the cursor flying all over the place. Seems to like the first touch or two then gets consistently bad.
Any progress/ideas? Thanks, Will On Monday, 7 October 2013 04:05:18 UTC+1, Terry Storm wrote: > > Update to above, I realised I was using Wheezy 7.0 and there was a 7.1 > available, so I tried that, updated and installed LXDE, and some of the > issues are resolved, however now the mouse pointer jumps all over the > place, same as what happens on Angstrom. > > Terry > > On Monday, 7 October 2013 12:05:57 UTC+13, Terry Storm wrote: >> >> Hello >> >> Have you had any luck with this? >> >> Just trying debian wheezy on the BBB with the LCD7 and I find the mouse >> moves ok using the touch screen, but its constantly trying to draw >> selection boxes. >> It also needs to be calibrated as it doesnt reach to the very edges of >> the display. >> >> Regards >> Terry >> >> On Monday, 3 June 2013 06:55:31 UTC+12, genpix wrote: >>> >>> I did >>> cat /proc/bus/input/devices >>> >>> and now I see the list of input devices. >>> Apparently, /dev/input/event0 is associated with power button (in the >>> way how I compiled my kernel). >>> "ti-tsc" (this is a kernel driver for TI's tscadc) is associated with >>> /dev/input/event1. >>> This could help a newbie (like me) to find out what eventX should be >>> used for your touchscreen >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
