Ok, got it. I need to contribute to try it out. Here is my problem, and I would like to hear if this solves it. I have a hub that uses the SMSC 2512 hub chip (USB2512QFN36). Mass storage devices work as long as it's inserted at power up. Any hot plugging after boot will not work. Does your kernel fix this problem?
Also, I have some other items in the kernel that I need enabled. If I contribute $50 or $125 I only get whatever you built into your kernel... right? Could I give you my .config and you build it? On Mon, Dec 23, 2013 at 6:33 PM, APRichelieu <[email protected]> wrote: > Den måndagen den 23:e december 2013 kl. 20:26:20 UTC+1 skrev Brent: > > Where do I go to get Ulf's kernel? I would like to test but I don't > know where to look. Is there a patch somewhere that I missed? > > > > Check The http://igg.me link in your post. > > > On Monday, December 9, 2013 5:57:56 PM UTC-5, [email protected]: > > I've also put in $125 and must say that I haven't had any troubles since > using Ulf's kernel. > > > > Thanks Ulf > > > > On Monday, December 2, 2013 1:53:39 PM UTC-7, Philippe Laurent wrote: > > I've ponied up for the $125 donation. Gotta have this running right. > > > > > > > > On Mon, Dec 2, 2013 at 7:23 AM, APRichelieu <[email protected]> wrote: > > > > > > > > > > > > > > Den lördagen den 31:e augusti 2013 kl. 17:42:09 UTC+2 skrev > [email protected]: > > > > > > I'm using my Beaglebone Black with a USB temperature sensor. It works > very well, however I noticed monitoring stopped last night after roughly 35 > days uptime. This morning I looked more closely into the log file and > noticed: > > > > > > > > > > > > kernel: [2892926.929555] CAUTION: musb: Babble Interrupt Occurred > > > > > > > > I wasn't able to successfully reset the USB device and before I was able > to restart the BBB stopped responding. I power-cycled it and it was back to > normal again. Any ideas what caused this kernel message? > > > > > > > > > > I set up a crowd-funding project on > > > > http://igg.me/at/eMagii/x/5581172 > > > > for people that wants to have USB host hot-plugging on the Beaglebone > Black > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > For more options, visit http://beagleboard.org/discuss > > > > --- > > > > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > > > > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/C6gMT2_FfiM/unsubscribe. > > > > To unsubscribe from this group and all its topics, send an email to > [email protected]. > > > > For more options, visit https://groups.google.com/groups/opt_out. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/C6gMT2_FfiM/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- -brent -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
