Hi,
Finally angstrom-v2013.06-yocto1.4 builds correctly on xubuntu 12.04.3
32-bit.
Regards
On 28/11/13 05:42, [email protected] wrote:
And to clarify and correct, I was wrong with the branch. It is
'angstrom-v2013.06-yocto1.4'. I typoed the year.
Chris
On Wednesday, November 27, 2013 6:11:07 AM UTC-5, Chris Morgan wrote:
Hello again.
I'm almost positive the issue is due to texinfo. With version 5.1
here
there have been changes that are incompatible with older man page
files, in particular the 'hsep' and 'veep' tokens.
I was able to resolve the issues I was having by switching from using
the angstrom setup-scripts.git master branch to using the v2012.06
branch, can't recall the full name right now.
Thank you for replying though, I did run into the dash issue under
Ubuntu before switching to Fedora for other reasons.
Chris
On Tue, Nov 26, 2013 at 10:22 PM, <[email protected]
<mailto:[email protected]>> wrote:
> Hi,
>
> The texinfo package was installed from an Ubuntu repository and
has the
> version number 4.13a.dfsg.1-8ubuntu. ie It is version 4.13. I
suppose you
> have three choices, either install an older version of texinfo,
use a
> different host or fix the problem in Angstrom.
>
> The INHERIT change won't alter the outcome. I'm just trying to
speed up
> kernel rebuilds.
>
> Did you check that bash is indeed bash and not dash?
>
> While the v2012.12 branch builds correctly, I have had problems
with
> v2013.06 (libpseudo issues) and v2013.12 (dtc not included in
rootfs) for
> different reasons. I have switched from a 64-bit Mint host back
to 32-bit
> Xubuntu host to investigate these problems.
>
> Hope this helps ....
>
>
> On Wednesday, November 27, 2013 4:24:17 AM UTC+11, Chris Morgan
wrote:
>>
>> On Tue, Nov 26, 2013 at 9:57 AM, <[email protected]> wrote:
>> > Is this problem occurring while you are attempting to build the
>> > console-image? I just finished a build a few minutes ago
using the
>> > following:
>> >
>> > This guide details the process of building a console image
from the
>> > Angstrom
>> > source on an Xubuntu 12.04.3 32-bit Linux host.
>> >
>> > Prerequisites
>> >
>> > Then we need some additional development tools. Enter the
following:
>> >
>> > sudo apt-get install sed wget cvs subversion git-core
coreutils
>> > unzip texi2html texinfo docbook-utils gawk python-pysqlite2
diffstat
>> > help2man make gcc build-essential g++ desktop-file-utils chrpath
>> >
>> >
>> > /bin/sh (ls -l /bin/sh) is symbolically linked to dash.
"dash" is a
>> > POSIX
>> > compliant shell that is much smaller than "bash". Some broken
shell
>> > scripts
>> > still make use of bash extensions while calling into /bin/sh.
To work
>> > around
>> > this issue call "sudo dpkg-reconfigure dash" and select No
when it asks
>> > you
>> > to install dash as /bin/sh.
>> >
>> > Download Angstrom Distribution and Build
>> >
>> > To download the distribution for Beaglebone enter the following
>> > commands:
>> >
>> > cd ~/Projects
>> >
>> > mkdir angstrom-v2012.12
>> >
>> > cd ./angstrom-v2012.12
>> >
>> > git clone
git://github.com/Angstrom-distribution/setup-scripts.git
<http://github.com/Angstrom-distribution/setup-scripts.git>
>> >
>> > cd setup-scripts
>> >
>> > MACHINE=beaglebone ./oebb.sh config beaglebone
>> >
>> > MACHINE=beaglebone ./oebb.sh update
>> >
>> > In file setup-scripts/conf/local.conf modify the following line:
>> >
>> > INHERIT += "rm_work"
>> >
>> > to
>> >
>> > # INHERIT += "rm_work"
>> >
>> > And to compile the console version of the distribution:
>> >
>> > . ~/.oe/environment-angstromv2012.12
>> >
>> > bitbake console-image
>> >
>> > During these steps the computer must be connected to the
Internet.
>> >
>> > Or are you trying to manually compile manual pages?
>> >
>> >
>>
>>
>> Hello.
>>
>> I'm connected to the internet, I haven't made the changes to
INHERIT
>> that you have and I'm trying to build the same target. Running on
>> Fedora 19 here.
>>
>> Would you happen to know what version of texinfo you have? I have
>> version 5.1 here.
>>
>> Chris
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
