On Tue, Dec 24, 2013 at 4:16 PM, Dan Fraser <[email protected]> wrote: > I am trying to use my Beaglebone Black for some home automation using an > Insteon 2412U modem, which shows up as an FTDI serial device. > > I am running Debian: Linux 3.8.13-bone32 #1 SMP Fri Dec 13 16:57:41 UTC 2013 > armv7l GNU/Linux > > root@home:/opt/misterhouse/data# lsusb > Bus 001 Device 002: ID 0403:6001 Future Technology Devices International, > Ltd FT232 USB-Serial (UART) IC > > When I reboot the BBB, it no longer seems to be connected when the system > comes back up. A power cycle of the BBB doesn't get it back either! > > I have to power cycle the BBB with the FTDI device disconnected, and then > re-plug it after boot in order to see it again. > > Any ideas on what might be happening here? Any hints? > > Thanks, > > Dan > > [dmesg log of a working connect] > > [ 90.017824] usb usb1: usb wakeup-resume > [ 90.017930] usb usb1: usb auto-resume > [ 90.017980] hub 1-0:1.0: hub_resume > [ 90.018090] hub 1-0:1.0: port 1: status 0101 change 0001 > [ 90.121063] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000 > [ 90.121213] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s > [ 90.226483] usb 1-1: new full-speed USB device number 2 using musb-hdrc > [ 90.355292] usb 1-1: ep0 maxpacket = 8 > [ 90.357055] usb 1-1: default language 0x0409 > [ 90.361904] usb 1-1: udev 2, busnum 1, minor = 1 > [ 90.361961] usb 1-1: New USB device found, idVendor=0403, idProduct=6001 > [ 90.369143] usb 1-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 90.376754] usb 1-1: Product: FT232R USB UART > [ 90.381398] usb 1-1: Manufacturer: FTDI > [ 90.385515] usb 1-1: SerialNumber: A700aicy > [ 90.396492] usb 1-1: usb_probe_device > [ 90.396556] usb 1-1: configuration #1 chosen from 1 choice > [ 90.398438] usb 1-1: adding 1-1:1.0 (config #1, interface 0) > [ 90.404527] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 > [ 90.404645] hub 1-0:1.0: port 1 enable change, status 00000103 > [ 90.579180] usbcore: registered new interface driver usbserial > [ 90.593348] usbcore: registered new interface driver usbserial_generic > [ 90.627166] usbserial: USB Serial support registered for generic > [ 90.662980] usbcore: registered new interface driver ftdi_sio > [ 90.674351] usbserial: USB Serial support registered for FTDI USB Serial > Device > [ 90.696181] ftdi_sio 1-1:1.0: usb_probe_interface > [ 90.696218] ftdi_sio 1-1:1.0: usb_probe_interface - got id > [ 90.696255] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected > [ 90.705353] usb 1-1: Detected FT232RL > [ 90.709283] usb 1-1: Number of endpoints 2 > [ 90.713592] usb 1-1: Endpoint 1 MaxPacketSize 64 > [ 90.718448] usb 1-1: Endpoint 2 MaxPacketSize 64 > [ 90.723294] usb 1-1: Setting MaxPacketSize 64 > [ 90.729571] usb 1-1: FTDI USB Serial Device converter now attached to > ttyUSB0
pastebin.com your dmesg when it "fails" Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
