Try the RMA process and see. No way to determine the damage and whether or not it can be fixed without looking at it..
http://beagleboard.org/Support/RMA Gerald On Thu, Dec 26, 2013 at 3:19 PM, <[email protected]> wrote: > > Hi, > > I hope you can help me with a problem that I have. > > As the title says, I accidentally wrong mounted BBB and LCD7 cape and BBB > died. > > I turned BBB for 180 degrees and mounted it on headers for beagle. When I > power-on LCD7 and nothing happened I knew immediately what I did wrong. > Now, BBB does not respond any more. If BBB is powered by USB nothing > happens and if it is powered by 5V DC connector, PWR led blinks with no > further response. > In my opinion, the problem is powering BBB trough LCD7 cape that was in > wrong header and pins. > I checked the BBB schematic and the LCD7 schematic and I noticed that LCD7 > cape powered BBB by P9 header pins 3-8. In my case (when BBB turned for > 180 degrees ) those pins are connected to P8 header pins 39-44 (which are > LCD_DATA2 to LCD_DATA 7 pins). > > Now I wonder if anything can be done to repair my BBB? Or it is truly > died? > > Thanks for your help, > Davorin > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
