./mk_mmc.sh --mmc /dev/sdb -dtb omap3-beagle-xm --distro wheezy-armf This seemed to all work fine but when I put it in to the BBxm nothing happened.
See attached. Cheers Charlie On Wednesday, January 1, 2014 6:24:36 PM UTC, RobertCNelson wrote: > > On Wed, Jan 1, 2014 at 12:19 PM, charlie <[email protected]<javascript:>> > wrote: > > I have had my BBxm up and runnning for some months and yesterday whilst > > trying OpenHab it crashed and when rebooted it says: > > /bin/sh:cant access tty; job control turned off > > (initramfs) > > > > I tried creating another debian installation on a sd micro 8GB card > using > > RobertCNelson installation script which I used to create the original > but > > fails to even boot. > > I don't have anything called "installation script"... Care to > re-phrase "exactly" what you did? > > > Is my BBxm broken? > > Of course it is! > > So using "pastebin.com" show us your serial boot log.. > > Regards, > -- > Robert Nelson > http://www.rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
charles@charles-laptop:~/flash-omap/netinstall$ sudo ./mk_mmc.sh --mmc /dev/sdb --dtb omap3-beagle-xm --distro wheezy-armhf I see... fdisk -l: Disk /dev/sda: 60.0 GB, 60011642880 bytes Disk /dev/sdb: 7822 MB, 7822376960 bytes mount: /dev/sda1 on / type ext4 (rw,errors=remount-ro) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) /dev/sdb1 on /media/boot type vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks) Are you 100% sure, on selecting [/dev/sdb] (y/n)? y Script Version git: 3377322 ----------------------------- Downloading Device's Bootloader ----------------------------- 2014-01-01 17:59:46 URL:http://rcn-ee.net/deb/tools/latest//bootloader-ng [4877/4877] -> "/tmp/tmp.ubppHmQN8l/dl/bootloader-ng" [1] 2014-01-01 17:59:47 URL:http://rcn-ee.net/deb/tools/omap3_beagle/MLO-omap3_beagle-v2013.07-r2 [49148/49148] -> "/tmp/tmp.ubppHmQN8l/dl/MLO-omap3_beagle-v2013.07-r2" [1] SPL Bootloader: MLO-omap3_beagle-v2013.07-r2 --2014-01-01 17:59:47-- http://rcn-ee.net/deb/tools/omap3_beagle/u-boot-omap3_beagle-v2013.07-r2.img Resolving rcn-ee.net (rcn-ee.net)... 69.163.128.251 Connecting to rcn-ee.net (rcn-ee.net)|69.163.128.251|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 348776 (341K) [text/plain] Saving to: `/tmp/tmp.ubppHmQN8l/dl/u-boot-omap3_beagle-v2013.07-r2.img' 100%[======================================>] 348,776 126K/s in 2.7s 2014-01-01 17:59:50 (126 KB/s) - `/tmp/tmp.ubppHmQN8l/dl/u-boot-omap3_beagle-v2013.07-r2.img' saved [348776/348776] UBOOT Bootloader: u-boot-omap3_beagle-v2013.07-r2.img Downloading Device's Kernel Image ----------------------------- 2014-01-01 17:59:51 URL:http://rcn-ee.net/deb/wheezy-armhf/LATEST-omap [230/230] -> "/tmp/tmp.ubppHmQN8l/dl/LATEST-omap" [1] 2014-01-01 17:59:51 URL:http://rcn-ee.net/deb/wheezy-armhf/v3.7.10-x13/ [1275/1275] -> "/tmp/tmp.ubppHmQN8l/dl/index.html" [1] --2014-01-01 17:59:51-- http://rcn-ee.net/deb/wheezy-armhf/v3.7.10-x13/linux-image-3.7.10-x13_1.0wheezy_armhf.deb Resolving rcn-ee.net (rcn-ee.net)... 69.163.128.251 Connecting to rcn-ee.net (rcn-ee.net)|69.163.128.251|:80... connected. HTTP request sent, awaiting response... 416 Requested Range Not Satisfiable The file is already fully retrieved; nothing to do. --2014-01-01 17:59:52-- http://rcn-ee.net/deb/wheezy-armhf/v3.7.10-x13/3.7.10-x13-firmware.tar.gz Resolving rcn-ee.net (rcn-ee.net)... 69.163.128.251 Connecting to rcn-ee.net (rcn-ee.net)|69.163.128.251|:80... connected. HTTP request sent, awaiting response... 416 Requested Range Not Satisfiable The file is already fully retrieved; nothing to do. --2014-01-01 17:59:52-- http://rcn-ee.net/deb/wheezy-armhf/v3.7.10-x13/3.7.10-x13-dtbs.tar.gz Resolving rcn-ee.net (rcn-ee.net)... 69.163.128.251 Connecting to rcn-ee.net (rcn-ee.net)|69.163.128.251|:80... connected. HTTP request sent, awaiting response... 416 Requested Range Not Satisfiable The file is already fully retrieved; nothing to do. Using Kernel: linux-image-3.7.10-x13_1.0wheezy_armhf.deb Using DTBS: 3.7.10-x13-dtbs.tar.gz Downloading NetInstall Image ----------------------------- Note: NetInstall has u-boot header, removing... ----------------------------- 68710+1 records in 68710+1 records out 4397453 bytes (4.4 MB) copied, 0.459641 s, 9.6 MB/s ----------------------------- md5sum of NetInstall: 46a4f9de68824c9852b89f3566b89a49 Clone/Pulling linux-firmware.git ----------------------------- Already up-to-date. ----------------------------- Adding Firmware for onboard WiFi/Bluetooth module ----------------------------- NetInstall: Creating Custom Image ----------------------------- NetInstall: Extracting Base initrd.gz 19645 blocks NetInstall: Removing Optional Stuff to Save RAM Space NetInstall: Adding Distro Tweaks and Preseed Configuration `/home/charles/flash-omap/netinstall/scripts/debian-finish.sh' -> `/tmp/tmp.ubppHmQN8l/initrd-tree/etc/finish-install.sh' `/home/charles/flash-omap/netinstall/scripts/wheezy-preseed.cfg' -> `/tmp/tmp.ubppHmQN8l/initrd-tree/preseed.cfg' NetInstall: Extracting Kernel Boot Image NetInstall: Adding Device Tweaks NetInstall: Compressing initrd image 77791 blocks Unmounting Partitions ----------------------------- Using fdisk to create an omap compatible fatfs BOOT partition ----------------------------- Command (m for help): Partition type: p primary (0 primary, 0 extended, 4 free) e extended Select (default p): Partition number (1-4, default 1): First sector (2048-15278079, default 2048): Using default value 2048 Last sector, +sectors or +size{K,M,G} (2048-15278079, default 15278079): Command (m for help): Selected partition 1 Hex code (type L to list codes): Changed system type of partition 1 to e (W95 FAT16 (LBA)) Command (m for help): Disk /dev/sdb: 7822 MB, 7822376960 bytes 241 heads, 62 sectors/track, 1022 cylinders, total 15278080 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000a4a53 Device Boot Start End Blocks Id System /dev/sdb1 2048 133119 65536 e W95 FAT16 (LBA) Command (m for help): The partition table has been altered! Calling ioctl() to re-read partition table. WARNING: If you have created or modified any DOS 6.x partitions, please see the fdisk manual page for additional information. Syncing disks. Setting Boot Partition's Boot Flag ----------------------------- Formating Boot Partition ----------------------------- mkfs.vfat 3.0.12 (29 Oct 2011) Populating Boot Partition ----------------------------- `/tmp/tmp.ubppHmQN8l/dl/MLO-omap3_beagle-v2013.07-r2' -> `/tmp/tmp.ubppHmQN8l/disk/MLO' `/tmp/tmp.ubppHmQN8l/dl/MLO-omap3_beagle-v2013.07-r2' -> `/tmp/tmp.ubppHmQN8l/disk/backup/MLO' ----------------------------- `/tmp/tmp.ubppHmQN8l/dl/u-boot-omap3_beagle-v2013.07-r2.img' -> `/tmp/tmp.ubppHmQN8l/disk/u-boot.img' `/tmp/tmp.ubppHmQN8l/dl/u-boot-omap3_beagle-v2013.07-r2.img' -> `/tmp/tmp.ubppHmQN8l/disk/backup/u-boot.img' ----------------------------- Copying Kernel image: `/tmp/tmp.ubppHmQN8l/kernel/boot/vmlinuz-3.7.10-x13' -> `/tmp/tmp.ubppHmQN8l/disk/zImage.net' `/tmp/tmp.ubppHmQN8l/kernel/boot/vmlinuz-3.7.10-x13' -> `/tmp/tmp.ubppHmQN8l/disk/vmlinuz' ----------------------------- Copying Kernel initrd: `/tmp/tmp.ubppHmQN8l/initrd.mod.gz' -> `/tmp/tmp.ubppHmQN8l/disk/initrd.net' ----------------------------- Copying Device Tree Files: am335x-bone.dtb am335x-bonelt.dtb am335x-evm.dtb omap2420-h4.dtb omap3-beagle-xm.dtb omap3-evm.dtb omap3-tobi.dtb omap4-panda.dtb omap4-pandaES.dtb omap4-sdp.dtb omap4-var_som.dtb omap5-evm.dtb `/home/charles/flash-omap/netinstall/dl/wheezy-armhf/3.7.10-x13-dtbs.tar.gz' -> `/tmp/tmp.ubppHmQN8l/disk/3.7.10-x13-dtbs.tar.gz' ----------------------------- Copying uEnv.txt based boot scripts to Boot Partition Net Install Boot Script: `/tmp/tmp.ubppHmQN8l/bootscripts/netinstall.cmd' -> `/tmp/tmp.ubppHmQN8l/disk/uEnv.txt' ----------------------------- kernel_file=zImage.net initrd_file=initrd.net #Video: Uncomment to override U-Boots value: #defaultdisplay=dvi #dvimode=1280x720MR-16@601 #vram=12MB console=tty0 mmcroot=/dev/ram0 rw xyz_load_image=fatload mmc 0:1 0x80300000 ${kernel_file} xyz_load_initrd=fatload mmc 0:1 0x81600000 ${initrd_file}; setenv initrd_size ${filesize} xyz_load_dtb=fatload mmc 0:1 0x815f0000 /dtbs/${dtb_file} xyz_mmcboot=run xyz_load_image; run xyz_load_initrd; echo Booting from mmc ... video_args=setenv video vram=${vram} omapfb.mode=${defaultdisplay}:${dvimode} omapdss.def_disp=${defaultdisplay} device_args=run video_args; run expansion_args; run mmcargs mmcargs=setenv bootargs console=${console} ${optargs} ${video} root=${mmcroot} ${expansion} expansion_args=setenv expansion buddy=${buddy} buddy2=${buddy2} loaduimage=run xyz_mmcboot; run device_args; bootz 0x80300000 0x81600000:${initrd_size} ----------------------------- Normal Boot Script: `/tmp/tmp.ubppHmQN8l/bootscripts/normal.cmd' -> `/tmp/tmp.ubppHmQN8l/disk/backup/normal.txt' ----------------------------- kernel_file=zImage initrd_file=initrd.img #Video: Uncomment to override U-Boots value: #defaultdisplay=dvi #dvimode=1280x720MR-16@601 #vram=12MB console=ttyO2,115200n8 mmcroot=FINAL_PART ro mmcrootfstype=FINAL_FSTYPE rootwait fixrtc xyz_load_image=fatload mmc 0:1 0x80300000 ${kernel_file} xyz_load_initrd=fatload mmc 0:1 0x81600000 ${initrd_file}; setenv initrd_size ${filesize} xyz_load_dtb=fatload mmc 0:1 0x815f0000 /dtbs/${dtb_file} xyz_mmcboot=run xyz_load_image; run xyz_load_initrd; echo Booting from mmc ... video_args=setenv video vram=${vram} omapfb.mode=${defaultdisplay}:${dvimode} omapdss.def_disp=${defaultdisplay} device_args=run video_args; run expansion_args; run mmcargs mmcargs=setenv bootargs console=${console} ${optargs} ${video} root=${mmcroot} rootfstype=${mmcrootfstype} ${expansion} optargs=console=tty0 expansion_args=setenv expansion buddy=${buddy} buddy2=${buddy2} loaduimage=run xyz_mmcboot; run device_args; bootz 0x80300000 0x81600000:${initrd_size} ----------------------------- `/home/charles/flash-omap/netinstall/dl/wheezy-armhf/linux-image-3.7.10-x13_1.0wheezy_armhf.deb' -> `/tmp/tmp.ubppHmQN8l/disk/linux-image-3.7.10-x13_1.0wheezy_armhf.deb' Debug: #!/bin/sh format=1.0 board=BEAGLEBOARD_XM bootloader_location=fatfs_boot dd_spl_uboot_seek= dd_spl_uboot_bs= dd_uboot_seek= dd_uboot_bs= boot_image=bootz boot_script=uEnv.txt boot_fstype=fat serial_tty=ttyO2 kernel_addr=0x80300000 initrd_addr=0x81600000 load_addr=0x80008000 dtb_addr=0x815f0000 dtb_file= usbnet_mem=16384 Debug: Adding Useful scripts from: https://github.com/RobertCNelson/tools ----------------------------- Cloning into '/tmp/tmp.ubppHmQN8l/disk/tools'... remote: Reusing existing pack: 1114, done. remote: Total 1114 (delta 0), reused 0 (delta 0) Receiving objects: 100% (1114/1114), 175.50 KiB, done. Resolving deltas: 100% (619/619), done. ----------------------------- Debug: Contents of Boot Partition ----------------------------- total 40M -rwxr-xr-x 1 root root 16K Jan 1 18:01 3.7.10-x13-dtbs.tar.gz drwxr-xr-x 2 root root 2.0K Jan 1 18:01 backup drwxr-xr-x 2 root root 2.0K Jan 1 18:01 dtbs -rwxr-xr-x 1 root root 16M Jan 1 18:01 initrd.net -rwxr-xr-x 1 root root 18M Jan 1 18:01 linux-image-3.7.10-x13_1.0wheezy_armhf.deb -rwxr-xr-x 1 root root 48K Jan 1 18:01 MLO -rwxr-xr-x 1 root root 327 Jan 1 18:01 SOC.sh drwxr-xr-x 11 root root 2.0K Jan 1 18:01 tools -rwxr-xr-x 1 root root 341K Jan 1 18:01 u-boot.img -rwxr-xr-x 1 root root 892 Jan 1 18:01 uEnv.txt -rwxr-xr-x 1 root root 3.3M Jan 1 18:01 vmlinuz -rwxr-xr-x 1 root root 3.3M Jan 1 18:01 zImage.net ----------------------------- Finished populating Boot Partition ----------------------------- mk_mmc.sh script complete Script Version git: 3377322 ----------------------------- Note: Ubuntu Releases During Install, after proxy setup, there seems to be a LONG delay... (worst case 5 minutes on my Beagle xM)... Currently Investigating... -----------------------------
