On 10/25/2013 11:00 AM, Bernd Eggink wrote:
I'm baffled. I powered the BBB off, let it sleep for 30 min., did a
fresh boot - and there the interface is again! Can anybody explain
why? Never seen such a behavior with other Linuxes...
I have seen the PHY chip on the BBB get into a state that only a power
down or hard reset will fix. A soft reset/reboot does not fix the
problem.As the reset pin on the PHY is not software accessible, I see no
software fix.
Dave.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google
Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
