From: Maxim Podbereznyy <[email protected]> Reply-To: <[email protected]> Date: Friday, January 3, 2014 at 9:22 AM To: beagleboard <[email protected]> Subject: Re: [beagleboard] beagle boadrxm
> > All details are very needed. > > 02 янв. 2014 г. 18:57 пользователь <[email protected]> написал: >> how to interface beagle board-xm with dsp signals to reduce the noise using >> some filtering techiniques.plz can u help me for this project. If you use Linux Kernel V3.2, you can use SysLink to communicate between the ARMV7 and DSP processors. SysLink is a form of IPC and allow you to load DSP code onto the DSP, run the code and exchange info. If you want to use any of the later kernels, V3.8 or V3.12, there is no solution for OMAP3. TI migrated to RPMSG (SysLink3) which is now in mainline and is only supported on OMAP4, OMAP5 and OMAPL138. TI did have plans to support OMAP3, but I believe that this has all but been abandoned. Regards, John >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] >> <mailto:beagleboard%[email protected]> . >> For more options, visit https://groups.google.com/groups/opt_out. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
