Well if you prefer non open source solution and prefer a feature rich IDE(CCS5.X) backed by the vendor (TI) @ $79 xdsv2usb is the only way. I trust your google skills starting from here
http://elinux.org/BeagleBoard http://processors.wiki.ti.com/index.php/XDS100 code composer jtag support uses a .gel file to initialize processor and memory so you will have to google around for the Beagle Board one or uses the bootloader to initialize things and then grab control I dont recommend that approach The industry trend now is jtag over usb with no need for a connector the bone white supports this the Beagleboard and Panda and BBB need connectors On Friday, January 3, 2014 2:08 PM, Robert P. J. Day <[email protected]> wrote: On Fri, 3 Jan 2014, Bill Traynor wrote: > On Fri, Jan 3, 2014 at 9:56 AM, Robert P. J. Day <[email protected]> > wrote: > > > > a client is interested in JTAG debugging of a beagleboard xm and, if > > memory serves, one approach once upon a time was described here: > > > > http://elinux.org/BeagleBoardJTAG > > > > involving tin can tools' flyswatter 2 and openocd. is that still > > the best approach these days if one wants to keep things > > inexpensive? other options? thanks. > > This is still one of the most inexpensive ways to debug BB-XM. I > haven't personally done it in some time though. i've actually *never* done it, i just wanted to make sure there was no newer, spiffier way to do it beyond what was documented on that page. if there are any other pages on JTAG debugging that might be appropriate for the xM, by all means, let me know. thanks. rday -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ======================================================================== -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
