I received the BBB and if booted I can see a splash screen but then it disappears. I am using a 4A 5V external PSU (measured 5.13V). The unit however is running , because I could access it with a TTL (RS232) cable was able to create a passwd to ssh from Linux (Linux does not allow 'non' password for SSH). I first thought it might be a flash problem so I downloaded the latest image (On my Linux PC) and flash the on-board flash (took 1 hour), however the screen.. still does dead .. (My hardware setup however works fine with RPI, and the screen is standard 1280x1024) My two USB hubs also did not work on the BBB and I had to buy a new one, (they however work fine on the RPI and PC's). I tried various monitors as well. I even went a buy a 'expensive golden Phillips HDMI cable, but the problem persist. I was expection at least a screen on start-up on a new module..
It does however (pressing any key on the keyboard) recover later and then the beaglebone "Automatic logging in" is displayed .. but it seem to be useless and endless, Then once, with a black screen (after I had a breakfast) .. all seem well, and I could use the GUI, but could not find any connman-manger GUI for help, as the internet did not work. I do have a RPI as router / firewall and all my other PCs seem to have no problem with it, however on the next boot the same problem on the BBB .. no screen. I also bought a 7inch LCD cap from beagleboardtoys, needless to say I only have a blank screen, it does however flash a white screen on boot-up, that why I went to the HDMI route. I wanted to use connman to enable the internet .. but it seem one need a PHD to do it from the command line, who can remember and type correctly "wifi_dc85de828967_3257495245363836_managed_wep" ?.. we are no conn-mans 1. Screen : Where does one start to debug .. the BBB can be accessed via TTL & network .. 2. Connman .. is a GUI available,? Kind Regards Gerrie -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
