I'll work on one with you. shouldn't be that hard. just need a serial port to talk to the chip/module or even i2c with some modules. how about basing a cape off of this:
https://www.sparkfun.com/products/11058 and to start as a first cut just build the cape with a dip socket for this to plug into wired out to pins for 3v3, gnd, rxd/txd switchable between uart1 & uart2 pins, & i2c to the i2c pins. that takes care of the gps you asked about. now, if you added places to plug in sensors like used on the weather cape, a rtc, and a 9 axis motion sensor ic you'd have a board that could really be fun to play with! let me know if you'd like to build some boards. I can also help with artwork in eagle. Eric On Mon, Jan 6, 2014 at 4:11 AM, <[email protected]> wrote: > HI! > I want to design my own GPS cape board for BB Black. But I dont know > complete parts lists . Can anyone help me. > Thanks > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
