Thanks For the Prompt reply
How to apply the patch. I am trying with the following command diff --git
a/arch/arm/mach-omap2/board-omap3beagle.c
b/arch/arm/mach-omap2/board-omap3beagle.c index 4a71cb7..2148f35 100644 ---
a/arch/arm/mach-omap2/board-omap3beagle.c +++
b/arch/arm/mach-omap2/board-omap3beagle.c @@ -385,6 +385,7 @@ static int
__init omap3_beagle_i2c_init(void) beagle_twldata.vpll2->constraints.name =
"VDVI"; omap3_pmic_init("twl4030", &beagle_twldata); +
omap_register_i2c_bus(2, 400, NULL, 0); /* Bus 3 is attached to the DVI
port where devices like the pico DLP * projector don't work reliably with
400kHz */ omap_register_i2c_bus(3, 100, beagle_i2c_eeprom,
ARRAY_SIZE(beagle_i2c_eeprom));
*I also tried* the git diff commands but terminal shows error
So, finally how to enable the I2c2 iam also thinking of recompiling the
kernel from git clone.
On Wednesday, 8 January 2014 01:51:46 UTC+5:30, HARSHIT SINHA wrote:
>
> when i do i2cdetect only i2c1, i2c3 recognizes but no i2c-2. how to enable
> i2c2 plz
>
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
