On Wed, Jan 8, 2014 at 2:59 AM, Amit Singh <[email protected]> wrote: > I2c_2 is not there in sys/device/platform/omap > > Patch: > > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c > b/arch/arm/mach-omap2/board-omap3beagle.c index 4a71cb7..2148f35 100644 --- > a/arch/arm/mach-omap2/board-omap3beagle.c +++ > b/arch/arm/mach-omap2/board-omap3beagle.c @@ -385,6 +385,7 @@ static int > __init omap3_beagle_i2c_init(void) beagle_twldata.vpll2->constraints.name = > "VDVI"; omap3_pmic_init("twl4030", &beagle_twldata); + > omap_register_i2c_bus(2, 400, NULL, 0); /* Bus 3 is attached to the DVI port > where devices like the pico DLP * projector don't work reliably with 400kHz > */ omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, > ARRAY_SIZE(beagle_i2c_eeprom)); > > I am trying to apply this patch in terminal in txt format by command > "patch -p1 < path " but terminal does not execute anything.
That's a patch for the kernel source.. Grab the source your kernel, patch, rebuild, install.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
