Yes, I double checked the insertion of the board. Also, the LED's came on and the reset and power switches worked ok. I also flashed the latest image from the BeagleBoard.org site: BBB-eMMC-flasher-2013.09.04.img.xz with the same results. The images suggested earlier ( BBB-eMMC-flasher-v2013.06-2014.01.03.img.xz<http://downloads.angstrom-distribution.org/demo/beaglebone/testing/BBB-eMMC-flasher-v2013.06-2014.01.03.img.xz>) had some errors when I tried to unpack them with 7-Zip.
I may try ordering a cape from another vendor (Circuitco) and see if that has the same problem. I am presuming it uses the same driver. TIA for the dialog on this from everyone. Brian On Wed, Jan 8, 2014 at 9:12 AM, dlewin555 <[email protected]> wrote: > a silly question but this may happends anyway : > > did you checked that your board is plugged into the correct side ? > > Le mardi 7 janvier 2014 20:17:06 UTC+1, Terry Storm a écrit : >> >> That might be the problem then. >> The 4DCAPE-70T is based on the LCD7 A3, and the LCD7 A3 support on >> Angstrom only came out in August 2013 I believe. >> So reflash using the latest image and it should work, albeit the touch >> related issues which are discussed elsewhere. >> You could try the latest test release: http://downloads. >> angstrom-distribution.org/demo/beaglebone/testing/BBB- >> eMMC-flasher-v2013.06-2014.01.03.img.xz >> >> Else flash Android which is linked in the Datasheet from 4D, which does >> work correctly. >> >> >> On 7 January 2014 22:37, William Hermans <[email protected]> wrote: >> >>> Thats the version of angstrom the BBB shipped with back in June last >>> year ( e.g. when it first started shipping to the general public ). AKA, >>> ancient. >>> >>> >>> On Tue, Jan 7, 2014 at 12:11 AM, Terry Storm <[email protected]>wrote: >>> >>>> Hi Brian >>>> >>>> Sorry I don't know what that is. What distribution is that? >>>> >>>> Have you tried Android or Angstrom to verify the CAPE works correctly >>>> first? >>>> >>>> Terry >>>> >>>> >>>> On 7 January 2014 18:38, Brian Yee <[email protected]> wrote: >>>> >>>>> Terry, I am running version: Linux beaglebone 3.8.6 #1 SMP Sat Apr 13 >>>>> 09:10:52 CEST 2013 armv7l GNU/Linux >>>>> >>>>> >>>>> Brian >>>>> >>>>> >>>>> On Thursday, January 2, 2014 9:19:26 AM UTC-8, Brian Yee wrote: >>>>>> >>>>>> A couple of weeks ago I installed a 4D Systems 4DCAPE-70T on my BBB >>>>>> board and powered it up. >>>>>> I was able to connect via USB but there was no display on the LCD >>>>>> cape. I also tried to run it standalone >>>>>> with a USB mouse and keyboard (no HDMI display attached) but still no >>>>>> display. >>>>>> >>>>>> Has anyone else had luck with this, and what hardware/OS >>>>>> configuration did you use? Any known >>>>>> problems or hints? >>>>>> >>>>>> Thanks, >>>>>> >>>>>> Brian >>>>>> >>>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to a topic in the >>>>> Google Groups "BeagleBoard" group. >>>>> To unsubscribe from this topic, visit https://groups.google.com/d/ >>>>> topic/beagleboard/_fkiZcnCl2I/unsubscribe. >>>>> To unsubscribe from this group and all its topics, send an email to >>>>> [email protected]. >>>>> >>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>> >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "BeagleBoard" group. >>> To unsubscribe from this topic, visit https://groups.google.com/d/ >>> topic/beagleboard/_fkiZcnCl2I/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/_fkiZcnCl2I/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
