On Thu, Jan 9, 2014 at 11:30 AM, HARSHIT SINHA <[email protected]> wrote: > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c > b/arch/arm/mach-omap2/board-omap3beagle.c index 4a71cb7..2148f35 100644 --- > a/arch/arm/mach-omap2/board-omap3beagle.c +++ > b/arch/arm/mach-omap2/board-omap3beagle.c @@ -385,6 +385,7 @@ static int > __init omap3_beagle_i2c_init(void) beagle_twldata.vpll2->constraints.name = > "VDVI"; omap3_pmic_init("twl4030", &beagle_twldata); + > omap_register_i2c_bus(2, 400, NULL, 0); /* Bus 3 is attached to the DVI port > where devices like the pico DLP * projector don't work reliably with 400kHz > */ omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, > ARRAY_SIZE(beagle_i2c_eeprom));
> so how to apply this patch for ubuntu or is there any chance to run monitor > through bb-xm image u have said earlier That's a "kernel" patch.. You need to 1st download the kernel source for your particular build.. so: git clone git://kernel.ubuntu.com/ubuntu/ubuntu-precise.git cd ubuntu-precise git checkout origin/Ubuntu-3.2.0-23.36 -b tmp zcat /proc/config.gz > .config patch -p1 < ../../test.diff make ARCH=arm menuconfig make ARCH=arm uImage sudo cp arch/arm/boot/uImage /boot/uImage Good Luck! If that's too much, pay someone to do it for you... Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
