Hi,

I'm experiencing a similar behavior in a board based on the BeagleBone (the 
BB itself hasn't been modified):

The boot log:

...
[    2.155945] mmc0: new high speed SDHC card at address aaaa
[    2.162581] mmcblk0: mmc0:aaaa SU08G 7.40 GiB 
[    2.169448]  mmcblk0: p1 p2
[    2.172606] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    2.179049] davinci_mdio 4a101000.mdio: no live phy, scanning all
[    2.187284] davinci_mdio: probe of 4a101000.mdio failed with error -5
[    2.194505] Detected MACID = bc:6a:29:84:8d:3a
[    2.199173] Unhandled fault: external abort on non-linefetch (0x1008) at 
0xd0898000
[    2.207399] Internal error: : 1008 [#1] SMP ARM
[    2.212149] Modules linked in:
[    2.215364] CPU: 0    Not tainted  (3.8.13-bone35 #1)
[    2.220681] PC is at cpsw_probe+0x530/0xbcc
[    2.225077] LR is at ioremap_page_range+0xd8/0x16c
[    2.230101] pc : [<c03f77d8>]    lr : [<c02ead08>]    psr: a0000113
[    2.230101] sp : cf05fe38  ip : cf04d260  fp : cf43aa98
[    2.242123] r10: 00000001  r9 : cf43ad40  r8 : d0898000
[    2.247598] r7 : cf0d4800  r6 : 00000000  r5 : cf0d4810  r4 : cf43a800
[    2.254436] r3 : 00000000  r2 : 00000000  r1 : 4a100e13  r0 : d0898000
[    2.261279] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment 
kernel
[    2.268937] Control: 10c5387d  Table: 80004019  DAC: 00000015
[    2.274959] Process swapper/0 (pid: 1, stack limit = 0xcf05e240)
[    2.281254] Stack: (0xcf05fe38 to 0xcf060000)
[    2.285822] fe20:                                                       
00000000 00000000
[    2.294398] fe40: cf439e08 cf43ad40 00000000 c014cff0 22222222 00000020 
00000000 cf439e88
[    2.302974] fe60: cf439e08 cf439e08 00000008 c014cee0 00000000 cf439e08 
cf0d1488 cf4329c0
[    2.311548] fe80: 00000000 c014d8a0 cf0474b8 c005e690 00000000 00000003 
cf0d1488 00000000
[    2.320123] fea0: c0a2342c cf0d4810 cf0d4818 cf0d4810 cf0d4844 c0a2342c 
c0998794 c09b6000
[    2.328698] fec0: 00000000 cf05e008 00000000 c0381024 00000000 cf0d4810 
cf0d4844 c0998794
[    2.337272] fee0: 00000000 c0381210 00000000 c0998794 c03811a8 c037f860 
cf047478 cf0d0c80
[    2.345848] ff00: c0998794 cf4329c0 c098e038 c03807e8 c07f9eea c07f9eea 
00000000 c0998794
[    2.354421] ff20: c091ac78 c092d984 c090df10 c038175c 00000007 c091ac78 
c092d984 c090df10
[    2.362995] ff40: c09b6000 c0008894 c090df10 0000f434 c092d9b0 00000008 
00000007 c091ac78
[    2.371568] ff60: c092d984 c09b6000 c09b6000 000000f3 c091ac80 c08e8918 
00000007 00000007
[    2.380140] ff80: c08e8270 00000000 00000000 c0605bbc 00000000 00000000 
00000000 00000000
[    2.388711] ffa0: 00000000 c0605bc4 00000000 c000d478 00000000 00000000 
00000000 00000000
[    2.397282] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 
00000000 00000000
[    2.405854] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 
e7feefe6 e6bafaae
[    2.414456] [<c03f77d8>] (cpsw_probe+0x530/0xbcc) from [<c0381024>] 
(driver_probe_device+0xa4/0x1e4)
[    2.424036] [<c0381024>] (driver_probe_device+0xa4/0x1e4) from 
[<c0381210>] (__driver_attach+0x68/0x8c)
[    2.433888] [<c0381210>] (__driver_attach+0x68/0x8c) from [<c037f860>] 
(bus_for_each_dev+0x70/0x84)
[    2.443374] [<c037f860>] (bus_for_each_dev+0x70/0x84) from [<c03807e8>] 
(bus_add_driver+0xdc/0x218)
[    2.452861] [<c03807e8>] (bus_add_driver+0xdc/0x218) from [<c038175c>] 
(driver_register+0x9c/0x124)
[    2.462350] [<c038175c>] (driver_register+0x9c/0x124) from [<c0008894>] 
(do_one_initcall+0x8c/0x150)
[    2.471936] [<c0008894>] (do_one_initcall+0x8c/0x150) from [<c08e8918>] 
(kernel_init_freeable+0x108/0x1cc)
[    2.482071] [<c08e8918>] (kernel_init_freeable+0x108/0x1cc) from 
[<c0605bc4>] (kernel_init+0x8/0xe4)
[    2.491657] [<c0605bc4>] (kernel_init+0x8/0xe4) from [<c000d478>] 
(ret_from_fork+0x14/0x3c)
[    2.500394] Code: e59f164c ebfe1b48 ea0000d1 e58485c0 (e5982000) 
[    2.506770] ---[ end trace 9974d47096abe9bf ]---



-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.

Reply via email to