I purchased a bbb and used it for a day or two. eventually the ssh (putty) stopped responding. The log was very sparse and only indicated that it connected: Event Log: Writing new session log (SSH packets mode) to file: putty.log Event Log: Looking up host "192.168.7.2" Event Log: Connecting to 192.168.7.2 port 22
no login information appears, just a black, cold, empty putty window. when i disconnect the window shuts down with: :"Network error: Software caused connection abort" lights are flashing with the heartbeat pattern. I can see the files on the mount, and apparently I can run bonescript. I did try to adjust the time on the board, but not explicitly, only from the button on the web page. A serial connection via telnet responds the same way. connection with zero dialogue. I purchased two more bbb's, because I wanted to move forward with a little groping around as possible (there was no clear fix on the web), and now, after a few days, a second bbb is displaying precisely the same issue. I am using Windows 7 64 bit I tried it on a 32 bit XP machine, but with no change in the bbbs behavior. Any suggestions? Clearly I need to deal with this issue. I am going to upgrade the OS to try to fix it. I am praying that it is not a hardware issue. Would plugging and unplugging the usb cause problems? Any insight would be appreciated. -mandata -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
