Sorry guys, I have found the reason. It just doesnt read uEnv.txt when i try to boot from TFTP. After setting bootargs value it booted from RAM.
Have a nice weeekend. On Saturday, January 11, 2014 7:31:49 PM UTC+2, Buğra AYDOĞAR wrote: > > Hi all, > > i have beagleboard xM and using ti-sdk-beagleboard-06.00.00.00 > > I'm able to boot from SD/MMC card. However cant boot from TFTP with the > same image. It just hangs after Uncompressing Linux... done, booting the > kernel. > > Do you have any idea? What's wrong with it? Why it works with SD/MMC and > not working from RAM? You can see logs below. > > PS : Do not care about filesystem mount failure. > > > U-Boot SPL 2012.04.01 (Jan 11 2014 - 05:04:29) > Texas Instruments Revision detection unimplemented > OMAP SD/MMC: 0 > reading u-boot.img > reading u-boot.img > > > U-Boot 2012.04.01 (Jan 11 2014 - 05:04:29) > > OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz > OMAP3 Beagle board + LPDDR/NAND > I2C: ready > DRAM: 512 MiB > NAND: 0 MiB > MMC: OMAP SD/MMC: 0 > *** Warning - readenv() failed, using default environment > > In: serial > Out: serial > Err: serial > Beagle xM Rev C > No EEPROM on expansion board > Die ID #26a600029ff80000016842c81402800e > Net: Net Initialization Skipped > No ethernet found. > Hit any key to stop autoboot: 0 > gpio: pin 173 (gpio 173) value is 0 > gpio: pin 4 (gpio 4) value is 0 > SD/MMC found on device 0 > reading uEnv.txt > > ** Unable to read "uEnv.txt" from mmc 0:1 ** > reading uImage > > 3413096 bytes read > Booting from mmc ... > ## Booting kernel from Legacy Image at 80007fc0 ... > Image Name: Linux-3.3.7 > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 3413032 Bytes = 3.3 MiB > Load Address: 80008000 > Entry Point: 80008000 > Verifying Checksum ... OK > XIP Kernel Image ... OK > OK > > Starting kernel ... > > Uncompressing Linux... done, booting the kernel. > [ 0.000000] Booting Linux on physical CPU 0 > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 3.3.7 (bugraaydogar@ubuntu) (gcc version > 4.7.3 20130226 (prerelease) (crosstool-NG > linaro-1.13.1-4.7-2013.03-20130313 - Linaro GCC 2013.03) ) #1 Sat Jan 11 > 05:40:07 PST 2014 > [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), > cr=10c53c7d > [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing > instruction cache > [ 0.000000] Machine: OMAP3 Beagle Board > [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM > [ 0.000000] Memory policy: ECC disabled, Data cache writeback > [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk ) > [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/800 MHz > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 126720 > [ 0.000000] Kernel command line: console=ttyO2,115200n8 mpurate=auto > buddy=none camera=none vram=12M omapfb.mode=dvi:640x480MR-16@60 > omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait > [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) > [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 > bytes) > [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 > bytes) > [ 0.000000] allocated 1048576 bytes of page_cgroup > [ 0.le=memory' option if you don't want memory cgroups > [ 0.000000] Memory: 499MB = 499MB total > [ 0.000000] Memory: 498404k/498404k available, 25884k reserved, 0K > highmem > [ 0.000000] Virtual kernel memory layout: > [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) > [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) > [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) > [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) > [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) > [ 0.000000] .text : 0xc0008000 - 0xc061770c (6206 kB) > [ 0.000000] .init : 0xc0618000 - 0xc064e000 ( 216 kB) > [ 0.000000] .data : 0xc064e000 - 0xc069e800 ( 322 kB) > [ 0.000000] .bss : 0xc069e824 - 0xc06d8034 ( 231 kB) > [ 0.000000] NR_IRQS:474 > [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 > interrupts > [ 0.000000] Total of 96 interrupts on 1 active controller > [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz > [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps > every 131071999ms > [ 0.000000] Console: colour dummy device 80x30 > [ 0.000122] Calibrating delay loop... 651.20 BogoMIPS (lpj=2543616) > [ 0.038330] pid_max: default: 32768 minimum: 301 > [ 0.038482] Mount-cache hash table entries: 512 > [ 0.038787] Initializing cgroup subsys cpuacct > [ 0.038787] Initializing cgroup subsys memory > [ 0.038818] Initializing cgroup subsys devices > [ 0.038848] Initializing cgroup subsys freezer > [ 0.038848] Initializing cgroup subsys blkio > [ 0.038848] Initializing cgroup subsys perf_event > [ 0.038940] CPU: Testing write buffer coherency: ok > [ 0.039123] Setting up static identity map for 0x80461c08 - 0x80461c60 > [ 0.039703] devtmpfs: initialized > [ 0.041046] omap_hwmod: usbtll_fck: missing clockdomain for usbtll_fck. > [ 0.073089] print_constraints: dummy: > [ 0.073303] NET: Registered protocol family 16 > [ 0.073455] GPMC revision 5.0 > [ 0.074554] gpiochip_add: registered GPIOs 0 to 31 on device: gpio > [ 0.074615] OMAP GPIO hardware version 2.5 > [ 0.074707] gpiochip_add: registered GPIOs 32 to 63 on device: gpio > [ 0.074859] gpiochip_add: registered GPIOs 64 to 95 on device: gpio > [ 0.075012] gpiochip_add: registered GPIOs 96 to 127 on device: gpio > [ 0.075164] gpiochip_add: registered GPIOs 128 to 159 on device: gpio > [ 0.075286] gpiochip_add: registered GPIOs 160 to 191 on device: gpio > [ 0.075714] omap_mux_init: Add partition: #1: core, flags: 0 > [ 0.076629] OMAP3 Beagle Rev: xM C > [ 0.078277] Reprogramming SDRC clock to 400000000 Hz > [ 0.078308] dpll3_m2_clk rate change failed: -22 > [ 0.079803] usbhs_omap: alias fck already exists > [ 0.079864] Found NAND on CS0 > [ 0.079895] Registering NAND on CS0 > [ 0.080291] hw-breakpoint: debug architecture 0x4 unsupported. > [ 0.082916] omap-mcbsp.2: alias fck already exists > [ 0.083038] omap-mcbsp.3: alias fck already exists > [ 0.083984] OMAP DMA hardware revision 5.0 > [ 0.090423] bio: create slab <bio-0> at 0 > [ 0.091247] SCSI subsystem initialized > [ 0.092468] usbcore: registered new interface driver usbfs > [ 0.092590] usbcore: registered new interface driver hub > [ 0.092712] usbcore: registered new device driver usb > [ 0.093261] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz > [ 0.095458] twl4030: PIH (irq 7) chaining IRQs 368..375 > [ 0.095550] twl4030: power (irq 373) chaining IRQs 376..383 > [ 0.096008] twl4030: gpio (irq 368) chaining IRQs 384..401 > [ 0.096252] gpiochip_add: registered GPIOs 192 to 211 on device: twl4030 > [ 0.098144] print_constraints: VUSB1V5: 15080] print_constraints: > VUSB1V8: 1800 mV normal standby > [ 0.098785] print_constraints: VUSB3V1: 3100 mV normal standby > [ 0.100189] twl4030_usb twl4030_usb: Initialized TWL4030 USB module > [ 0.100708] print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV > normal standby > [ 0.101104] print_constraints: VDAC: 1800 mV normal standby > [ 0.101501] print_constraints: VDVI: 1800 mV normal standby > [ 0.101959] print_constraints: VSIM: 1800 <--> 3000 mV at 1800 mV > normal standby > [ 0.102294] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz > [ 0.102966] omap-iommu omap-iommu.0: isp registered > [ 0.103088] Advanced Linux Sound Architecture Driver Version 1.0.24. > [ 0.103607] Bluetooth: Core ver 2.16 > [ 0.103668] NET: Registered protocol family 31 > [ 0.103668] Bluetooth: HCI device and connection manager initialized > [ 0.103698] Bluetooth: HCI socket layer initialized > [ 0.103698] Bluetooth: L2CAP socket layer initialized > [ 0.103729] Bluetooth: SCO socket layer initialized > [ 0.103942] Switching to clocksource 32k_counter > [ 0.113281] usbhs_omap usbhs_omap: xclk60mhsp1_ck set parentfailed > error:-22 > [ 0.113281] usbhs_omap usbhs_omap: xclk60mhsp2_ck set parentfailed > error:-22 > [ 0.113677] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) > [ 0.123016] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 > using DMA, IRQ 92 > [ 0.123321] NET: Registered protocol family 2 > [ 0.123504] IP route cache hash table entries: 4096 (order: 2, 16384 > bytes) > [ 0.123809] TCP established hash table entries: 16384 (order: 5, 131072 > bytes) > [ 0.124084] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) > [ 0.124237] TCP: Hash tables configured (established 16384 bind 16384) > [ 0.124267] TCP reno registered > [ 0.124267] UDP hash table entries: 256 (order: 0, 4096 bytes) > [ 0.124298] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) > [ 0.124481] NET: Registered protocol family 1 > [ 0.124786] RPC: Registered named UNIX socket transport module. > [ 0.124786] RPC: Registered udp transport module. > [ 0.124816] RPC: Registered tcp transport module. > [ 0.124816] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 0.127685] VFS: Disk quotas dquot_6.5.2 > [ 0.127746] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 0.128204] squashfs: version 4.0 (2009/01/31) Phillip Lougher > [ 0.128448] nfs4filelayout_init: NFSv4 File Layout Driver Registering... > [ 0.128479] JFFS2 version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, > Inc. > [ 0.128967] msgmni has been set to 973 > [ 0.130096] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 253) > [ 0.130187] io scheduler noop registered > [ 0.130187] io scheduler deadline registered > [ 0.130249] io scheduler cfq registered (default) > [ 0.130859] OMAP DSS rev 2.0 > [ 0.132507] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.133605] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP > UART0 > [ 0.134063] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP > UART1 > [ 0.134368] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP > UART2 > [ 0.894989] console [ttyO2] enabled > [ 0.898986] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP > UART3 > [ 0.913177] brd: module loaded > [ 0.919830] loop: module loaded > [ 0.924835] No NAND device found > [ 0.928405] No NAND device found > [ 0.932647] usbcore: registered new interface driver catc > [ 0.938323] usbcore: registered new interface driver kaweth > [ 0.944213] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB > Ethernet driver > [ 0.952117] usbcore: registered new interface driver pegasus > [ 0.958129] usbcore: registered new interface driver rtl8150 > [ 0.964141] usbcore: registered new interface driver asix > [ 0.969818] usbcore: registered new interface driver cdc_ether > [ 0.975982] usbcore: registered new interface driver dm9601 > [ 0.981903] usbcore: registered new interface driver smsc95xx > [ 0.988006] usbcore: registered new interface driver gl620a > [ 0.993896] usbcore: registered new interface driver net1080 > [ 0.999877] usbcore: registered new interface driver plusb > [ 1.005676] usbcore: registered new interface driver rndis_host > [ 1.011932] usbcore: registered new interface driver cdc_subset > [ 1.018218] usbcore: registered new interface driver zaurus > [ 1.024047] usbcore: registered new interface driver MOSCHIP > usb-ethernet driver > [ 1.032135] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 1.039093] _regulator_get: ehci-omap.0 supply hsusb0 not found, using > dummy regulator > [ 1.047454] _regulator_get: ehci-omap.0 supply hsusb1 not found, using > dummy regulator > [ 3.065093] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller > [ 3.071350] ehci-omap ehci-omap.0: new USB bus registered, assigned bus > number 1 > [ 3.079254] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 > [ 3.096435] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 > [ 3.102508] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 3.109680] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 3.117309] usb usb1: Product: OMAP-EHCI Host Controller > [ 3.122924] usb usb1: Manufacturer: Linux 3.3.7 ehci_hcd > [ 3.128570] usb usb1: SerialNumber: ehci-omap.0 > [ 3.133819] hub 1-0:1.0: USB hub found > [ 3.137817] hub 1-0:1.0: 3 ports detected > [ 3.166687] Initializing USB Mass Storage driver... > [ 3.171844] usbcore: registered new interface driver usb-storage > [ 3.178222] USB Mass Storage support registered. > [ 3.183380] mousedev: PS/2 mouse device common for all mice > [ 3.190704] input: twl4030_pwrbutton as > /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0 > [ 3.202239] i2c /dev entries driver > [ 3.206237] Linux media interface: v0.10 > [ 3.210388] Linux video capture interface: v2.00 > [ 3.215850] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec > [ 3.222259] Bluetooth: HCI UART driver ver 2.2 > [ 3.226898] Bluetooth: HCI H4 protocol initialized > [ 3.231994] Bluetooth: HCI BCSP protocol initialized > [ 3.237243] Bluetooth: HCILL protocol initialized > [ 3.242126] Bluetooth: HCIATH3K protocol initialized > [ 3.247436] usbcore: registered new interface driver btusb > [ 3.253448] cpuidle: using governor ladder > [ 3.257690] cpuidle: using governor menu > [ 3.482788] usbcore: registered new interface driver usbhid > [ 3.488708] usbhid: USB HID core driver > [ 3.492828] usb 1-2: new high-speed USB device number 2 using ehci-omap > [ 3.500183] usbcore: registered new interface driver snd-usb-audio > [ 3.507385] OMAP3 Beagle/Devkit8000 SoC init > [ 3.599822] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok > [ 3.608795] ALSA device list: > [ 3.612030] #0: omap3beagle > [ 3.615112] oprofile: hardware counters not available > [ 3.620483] oprofile: using timer interrupt. > [ 3.625122] TCP cubic registered > [ 3.628601] NET: Registered protocol family 17 > [ 3.633270] NET: Registered protocol family 15 > [ 3.638000] lib80211: common routines for IEEE802.11 drivers > [ 3.644012] Registering the dns_resolver key type > [ 3.648956] VFP support v0.3: implementor 41 architecture 3 part 30 > variant c rev 3 > [ 3.657043] ThumbEE CPU extension supported. > [ 3.665191] sr_init: No PMIC hook to init smartreflex > [ 3.670715] smartreflex smartreflex.0: omap_sr_probe: SmartReflex > driver initialized > [ 3.678985] smartreflex smartreflex.1: omap_sr_probe: SmartReflex > driver initialized > [ 3.687225] SmartReflex Class3 initialized > [ 3.695098] clock: disabling unused clocks to save power > [ 3.701599] registered taskstats version 1 > [ 3.706573] fbcvt: 640x480@60: CVT Name - .307M3-R > [ 3.718750] Console: switching to colour frame buffer device 80x30 > [ 3.731201] usb 1-2: New USB device found, idVendor=0424, idProduct=9514 > [ 3.738311] usb 1-2: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > [ 3.746795] regulator_init_complete: VDAC: incomplete constraints, > leaving on > [ 3.756866] input: gpio-keys as /devices/platform/gpio-keys/input/input1 > [ 3.764190] hub 1-2:1.0: USB hub found > [ 3.768615] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) > [ 3.775512] hub 1-2:1.0: 5 ports detected > [ 3.785980] Waiting for root device /dev/mmcblk0p2... > [ 3.914459] mmc0: host does not support reading read-only switch. > assuming write-enable. > [ 3.925476] mmc0: new high speed SDHC card at address aaaa > [ 3.931640] mmcblk0: mmc0:aaaa SU04G 3.69 GiB > [ 3.938446] mmcblk0: p1 p2 > [ 4.003875] EXT3-fs (mmcblk0p2): error: couldn't mount because of > unsupported optional features (240) > [ 4.013702] List of all partitions: > [ 4.017456] b300 3872256 mmcblk0 driver: mmcblk > [ 4.023101] b301 72261 mmcblk0p1 > 00000000-0000-0000-0000-000000000000 > [ 4.031036] b302 3799040 mmcblk0p2 > 00000000-0000-0000-0000-000000000000 > [ 4.038940] No filesystem could mount root, tried: > [ 4.043914] Unable to handle kernel paging request at virtual address > 00303030 > [ 4.051727] pgd = c0004000 > [ 4.054534] [00303030] *pgd=00000000 > [ 4.058380] Internal error: Oops: 5 [#1] > [ 4.062438] Modules linked in: > [ 4.065643] CPU: 0 Not tainted (3.3.7 #1) > [ 4.070159] PC is at mount_block_root+0x19c/0x210 > [ 4.075073] LR is at mount_block_root+0x17c/0x210 > [ 4.079956] pc : [<c0618bd8>] lr : [<c0618bb8>] psr: 60000013 > [ 4.079956] sp : dec2bf60 ip : 00000000 fp : 00000000 > [ 4.091888] r10: c055f395 r9 : 00000000 r8 : 00008000 > [ 4.097320] r7 : c0ada1db r6 : c064259c r5 : dec40005 r4 : 00303030 > [ 4.104125] r3 : 00000001 r2 : dec2bf54 r1 : c055f36d r0 : 00000039 > [ 4.110900] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM > Segment kernel > [ 4.118499] Control: 10c5387d Table: 80004019 DAC: 00000015 > [ 4.124481] Process swapper (pid: 1, stack limit = 0xdec2a2f0) > [ 4.130554] Stack: (0xdec2bf60 to 0xdec2c000) > [ 4.135070] bf60: 00000000 c00b9d14 de8a653c 00000000 de810d88 dec2bf88 > 00006000 00000000 > [ 4.143585] bf80: 00006180 c00bae54 00000002 c06425ad c000e208 00000013 > 00000000 00000000 > [ 4.152099] bfa0: 00000000 c0618e20 00000019 00000000 c0669280 000000b3 > c069e8a0 c06425ad > [ 4.160614] bfc0: c000e208 c0618f9c fffffffe de8a6b00 00000000 c064da30 > c064da30 c0618888 > [ 4.169128] bfe0: 00000000 00000000 00000000 00000000 c0618788 c000e208 > 7fd7fdbf afffb7ee > [ 4.177642] [<c0618bd8>] (mount_block_root+0x19c/0x210) from > [<c0618e20>] (mount_root+0xec/0x10c) > [ 4.186889] [<c0618e20>] (mount_root+0xec/0x10c) from [<c0618f9c>] > (prepare_namespace+0x15c/0x1bc) > [ 4.196197] [<c0618f9c>] (prepare_namespace+0x15c/0x1bc) from > [<c0618888>] (kernel_init+0x100/0x130) > [ 4.205718] [<c0618888>] (kernel_init+0x100/0x130) from [<c000e208>] > (kernel_thread_exit+0x0/0x8) > [ 4.214965] Code: e1a00004 ebefe096 e2800001 e0844000 (e5d43000) > [ 4.221740] ---[ end trace beb57108c548aa87 ]--- > [ 4.226745] Kernel panic - not syncing: Attempted to kill init! > > > U-Boot SPL 2012.04.01 (Jan 11 2014 - 05:04:29) > Texas Instruments Revision detection unimplemented > OMAP SD/MMC: 0 > timed out in wait_for_bb: I2C_STAT=1000 > reading u-boot.img > reading u-boot.img > > > U-Boot 2012.04.01 (Jan 11 2014 - 05:04:29) > > OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz > OMAP3 Beagle board + LPDDR/NAND > I2C: ready > DRAM: 512 MiB > NAND: 0 MiB > MMC: OMAP SD/MMC: 0 > *** Warning - readenv() failed, using default environment > > In: serial > Out: serial > Err: serial > Beagle xM Rev C > No EEPROM on expansion board > Die ID #26a600029ff80000016842c81402800e > Net: Net Initialization Skipped > No ethernet found. > Hit any key to stop autoboot: 0 > OMAP3 beagleboard.org # usb start > (Re)start USB... > USB: Register 1313 NbrPorts 3 > USB EHCI 1.00 > scanning bus for devices... 3 USB Device(s) found > scanning bus for storage devices... 0 Storage Device(s) found > scanning bus for ethernet devices... 1 Ethernet Device(s) found > OMAP3 beagleboard.org # setenv serverip 192.168.2.4 > OMAP3 beagleboard.org # setenv ipaddr 192.168.2.24 > OMAP3 beagleboard.org # tftp 0x80007FC0 uImage > Waiting for Ethernet connection... done. > Using sms0 device > TFTP from server 192.168.2.4; our IP address is 192.168.2.24 > Filename 'uImage'. > Load address: 0x80007fc0 > Loading: T > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################ > ################################################################# > ################# > done > Bytes transferred = 3413096 (341468 hex) > OMAP3 beagleboard.org # bootm > ## Booting kernel from Legacy Image at 80007fc0 ... > Image Name: Linux-3.3.7 > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 3413032 Bytes = 3.3 MiB > Load Address: 80008000 > Entry Point: 80008000 > Verifying Checksum ... OK > XIP Kernel Image ... OK > OK > > Starting kernel ... > > Uncompressing Linux... done, booting the kernel. > > > > > > > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
