On Friday, January 17, 2014 7:38:47 PM UTC+1, RobertCNelson wrote: > > > Really "none" ?... > > Umm, how are you flashing it? > > ALL capes removed, NO USB, (ethernet can be plugged in), a real 5 volt > DC power (2amps).. > > No Capes, No Ethernet, Only Serial Console and 5V 2A USB Charger.
Only Power and serial connected and I did try it with your image - I was able to verify on the console that the image of yours is working propperly and creating the files - partitioning, rsync,... all working - in the end all LED turned on and everything. Then disconnecting from Power and removing SD card. Then powering it on - nothing happens on the serial line at all... And that is the experience with all the images I have tried--- That is why I am saying there is something VERY strange with my board - at least since I did disconnect it without shutting it down... So I fear that the pre-bootloader (the one loading MLO) is somehow "defective" and works only for the SD. Martin P.s: my guess is that if I clone the system created by your image on the eMMC to a 2GB SD, then it will boot correctly from SD - I can give it a try tomorrow... -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
