Hello! I've been hacking around with the BBB for some time now, mostly doing bare metal programming. On other boards that I build projects with, I usually use one of my TFTs that I have laying around and use my custom graphical interface for the UI part. But the BBB is different. While I have been able to use a TFT with it, I'd like to get the HDMI up and running on bare metal if possible. Looking over the datasheet for the TDA19988BHN I can see that basically it just takes the LCD RGB signals and concerts that to HDMI output. However, I have not had any luck with feeding it from the library I wrote for my TFT. Is there something different I need to do with the signals? Does the HDMI chip require some kind of initialization before being used? The datasheet I have is one that I found on some third party website and I suspect it may be incomplete. I can't find the official datasheet on NXP's website at all.
Any help would be appreciated. Any advice for anyone else who has had success in this arena would also be much appreciated. Thanks in advance! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
