Hi,
I want to transfer the image to BBB via TFTP and boot it,
but it stopped during the boot process. I have no idea what to do.
I show the log below.
Could anyone please help?
---------------------------
U-Boot SPL 2013.04-dirty (Jun 19 2013 - 09:57:14)
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx,
SoftConn)
musb-hdrc: MHDRC RTL version 2.0
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Peripheral mode controller at 47401000 using PIO, IRQ 0
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx,
SoftConn)
musb-hdrc: MHDRC RTL version 2.0
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Host mode controller at 47401800 using PIO, IRQ 0
OMAP SD/MMC: 0
mmc_send_cmd : timeout: No status update
reading u-boot.img
reading u-boot.img
U-Boot 2013.04-dirty (Jun 19 2013 - 09:57:14)
I2C: ready
DRAM: 512 MiB
WARNING: Caches not enabled
NAND: No NAND device found!!!
0 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - readenv() failed, using default environment
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx,
SoftConn)
musb-hdrc: MHDRC RTL version 2.0
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Peripheral mode controller at 47401000 using PIO, IRQ 0
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx,
SoftConn)
musb-hdrc: MHDRC RTL version 2.0
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Host mode controller at 47401800 using PIO, IRQ 0
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
Hit any key to stop autoboot: 0
U-Boot# setenv autoload no
U-Boot# dhcp
link up on port 0, speed 100, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.1.111
U-Boot# setenv serverip 192.168.1.57
U-Boot# tftp 0x80400000 uImage-dtb.am335x-boneblack
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.57; our IP address is 192.168.1.111
Filename 'uImage-dtb.am335x-boneblack'.
Load address: 0x80400000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
##############################################
1.1 MiB/s
done
Bytes transferred = 4484143 (446c2f hex)
U-Boot# setenv bootargs console=ttyO0,115200n8 quiet root=/dev/mmcblk0p2 ro
rootfstype=ext4 rootwait
U-Boot# bootm 0x80400000
## Booting kernel from Legacy Image at 80400000 ...
Image Name: Linux-3.8.3-00408-g8977b3f
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4484079 Bytes = 4.3 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.105586] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0
invalid phandle
[ 0.218389] omap2_mbox_probe: platform not supported
[ 0.459970] tps65217-bl tps65217-bl: no platform data provided
[ 0.540504] bone-capemgr bone_capemgr.8: slot #0: No cape found
[ 0.577609] bone-capemgr bone_capemgr.8: slot #1: No cape found
[ 0.614717] bone-capemgr bone_capemgr.8: slot #2: No cape found
[ 0.651827] bone-capemgr bone_capemgr.8: slot #3: No cape found
-----------------------------------------------------
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
