From: blima <[email protected]>
Reply-To: <[email protected]>
Date: Tuesday, January 21, 2014 at 7:40 AM
To: <[email protected]>
Subject: Re: [beagleboard] angstrom bitbake systemd-gnome-image fails
> Hello Everyone,
>
> I tried again. However, I did not use the instructions from the angstrom. I
> used the instructions previously listed:
>
> Hi Daniel,
>
> I think you should do the following:
> git checkout angstrom-v2013.12-yocto1.5
> MACHINE=beaglebone .oebb.sh config beaglebone
> . environment-angstrom-v2013.12
> You may have to delete your build folder.
>
> Now run your regular bitbake command.
> - show quoted text -
>
>
> This seemed to work. The big difference is that in the git/checkout angstrom
> command, it is specifying a specific yocto stream. The previous instruction
> for angstrom would set the yocto stream to whatever is current, followed by a
> request to update. This has failed 3 times out of the 3 I've attempted
> (ubuntu 12.04, 12.10, 13.04 etc).
>
> If I executed the above commands without an update, it worked out. So I think
> it did... Can anyone confirm if the commands being run directly from the
> angstrom distribution sight, when run without modification, work correctly, or
> possibly the distribution is broke? Yocto 1.5 is working though?
angstrom-v2013.12-yocto1.5 is the most up to date branch. You should update
the repo and update the meta layers as follows:
In you Angstrom folder do the following:
host> git pull
This updates the git repo
host> . environment-angstrom-v2013.12
host> ./oebb.sh update
This updates the meta layers
Now you should run your bitbake command to build a new image.
Regards,
John
>
>
> I've attached the log.
>
>
>
>
> Setup for beaglebone completed
> bennylima@ubuntu:~/setup-scripts$ . environment-angstrom-v2013.12
> bennylima@ubuntu:~/setup-scripts$ ls
> conf environment-angstrom-v2013.12 oebb.sh README scripts sources
> bennylima@ubuntu:~/setup-scripts$ MACHINE=beaglebone ./oebb.sh bitbake
> systemd-gnome-image
> Using environment-angstrom-v2013.12 to setup needed variables. It is
> recommended to do '. environment-angstrom-v2013.12' and run 'bitbake
> something' without using ./oebb.sh as wrapper
> Executing: MACHINE=beaglebone bitbake systemd-gnome-image
> NOTE: Started PRServer with DBfile:
> /home/bennylima/setup-scripts/cache/prserv.sqlite3, IP: 127.0.0.1, PORT:
> 38011, PID: 7515
> WARNING: Variable key FILES_${PN}-dev (${includedir} ${FILES_SOLIBSDEV}
> ${libdir}/*.la ${libdir}/*.o ${libdir}/pkgconfig ${datadir}/pkgconfig
> ${datadir}/aclocal ${base_libdir}/*.o ${libdir}/${BPN}/*.la
> ${base_libdir}/*.la) replaces original key FILES_mono-xsp-dev (
> /usr/lib/pkgconfig/xsp.pc /usr/lib/pkgconfig/xsp-2.pc ).
> WARNING: Unable to get checksum for mono SRC_URI entry Makefile.am.diff: file
> could not be found
> WARNING: Unable to get checksum for mono SRC_URI entry config.in.diff: file
> could not be found
> WARNING: Unable to get checksum for mono SRC_URI entry Makefile.diff: file
> could not be found
> WARNING: Unable to get checksum for mono-native SRC_URI entry
> Makefile.am.diff: file could not be found
> WARNING: Unable to get checksum for mono-native SRC_URI entry config.in.diff:
> file could not be found
> WARNING: Unable to get checksum for mono-native SRC_URI entry Makefile.diff:
> file could not be found
> Parsing recipes: 100%
> |#############################################################| Time: 00:01:56
> Parsing of 3057 .bb files complete (0 cached, 3057 parsed). 3547 targets, 176
> skipped, 0 masked, 0 errors.
> WARNING: No recipes available for:
>
> /home/bennylima/setup-scripts/sources/meta-angstrom/recipes-core/systemd/syste
> md_206.bbappend
>
> /home/bennylima/setup-scripts/sources/meta-openembedded/meta-systemd/oe-core/r
> ecipes-core/systemd/systemd_206.bbappend
> NOTE: Resolving any missing task queue dependencies
>
> Build Configuration:
> BB_VERSION = "1.20.0"
> BUILD_SYS = "x86_64-linux"
> NATIVELSBSTRING = "Ubuntu-13.10"
> TARGET_SYS = "arm-angstrom-linux-gnueabi"
> MACHINE = "beaglebone"
> DISTRO = "angstrom"
> DISTRO_VERSION = "v2013.12"
> TUNE_FEATURES = "armv7a vfp thumb neon callconvention-hard"
> TARGET_FPU = "vfp-neon"
> meta-angstrom =
> "angstrom-v2013.12-yocto1.5:8fcd781b777a7a94f2b97514c9691a2b5c74eaf2"
> meta-oe
> meta-efl
> meta-gpe
> meta-gnome
> meta-xfce
> meta-initramfs
> toolchain-layer
> meta-multimedia
> meta-networking
> meta-webserver
> meta-ruby
> meta-filesystems
> meta-perl =
> "angstrom-staging-yocto1.5:1f79c7fbc394044b61f9650838bc45740490acac"
> meta-kde = "master:f45abfd4d87b0132a2565499392d2d49f465d847"
> meta-opie = "master:b241408b31c2ffd941b8b38bd385136ef675a703"
> meta-java = "master:9dfb7ecb87e67052e94641d6e02907c582264217"
> meta-browser = "master:fc3969f63bda343c38c40a23f746c560c4735f3e"
> meta-mono = "master:ac286b1682e6bcc486ceb30ef90a936949bbfeab"
> meta-qt5 = "dora:cefaba69a785c5221463f0eb496b749d5ddf8a5a"
> meta-systemd =
> "angstrom-staging-yocto1.5:1f79c7fbc394044b61f9650838bc45740490acac"
> meta-ros = "master:028d9ac86d1d1cb4222865bf78038084c0a06dd1"
> meta-beagleboard-extras
> common-bsp = "dora:82c7bf4a9bb81e46838d54cba878353b724c12e3"
> meta-ti =
> "angstrom-staging-yocto1.5:9b7a2f66fa3e8889f9ec49d1794ad068f7f76cdf"
> meta-fsl-arm = "dora:af392c22bf6b563525ede4a81b6755ff1dd2c1c6"
> meta-fsl-arm-extra = "dora:07ad83db0fb67c5023bd627a61efb7f474c52622"
> meta-nslu2 = "master:392b7799314a49b00f20a1bef004f9b0a0c9c364"
> meta-htc
> meta-nokia
> meta-openmoko
> meta-palm = "master:537d0c2ab41284012e1ba79716b085a861a6812a"
> meta-handheld = "master:5b5e68a93aae1016f5ac1d057a721b2dbf30b8d8"
> meta-intel
> meta-sugarbay
> meta-crownbay
> meta-emenlow
> meta-fri2
> meta-jasperforest
> meta-n450 = "dora:5da644641027c2b0ffa0c40255a19878a054dcf2"
> meta-allwinner = "master:e6415635f6144d48691ccd2ec9fc23ad6f87a177"
> meta-raspberrypi = "master:0537685dc76d28808f6333dcb191bb1afce0e02f"
> meta-minnow = "dora:2b0254c3213406554da43c3d0e0e0ab0d1deb02d"
> meta-linaro
> meta-linaro-toolchain
> meta-aarch64 = "dora:8aaf10d8dda34bc02d4ef62d0501b83603b6f827"
> meta =
> "angstrom-staging-yocto1.5:661bded82a0e8493b0788fdfe76ed3d9a625e8fa"
>
> NOTE: Preparing runqueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> WARNING: Failed to fetch URL http://zlib.net/pigz/pigz-2.3.tar.gz, attempting
> MIRRORS if available
> WARNING: Failed to fetch URL http://www.apache.org/dist/apr/apr-1.4.8.tar.bz2,
> attempting MIRRORS if available
> WARNING: Failed to fetch URL
> http://www.apache.org/dist/apr/apr-util-1.5.2.tar.gz, attempting MIRRORS if
> available
> WARNING: Failed to fetch URL
> http://www.apache.org/dist/subversion/subversion-1.7.10.tar.bz2, attempting
> MIRRORS if available
> WARNING: Failed to fetch URL
> http://pkg-shadow.alioth.debian.org/releases/shadow-4.1.4.3.tar.bz2,
> attempting MIRRORS if available
> WARNING: Failed to fetch URL
> http://downloads.sourceforge.net/project/libpng/libpng16/1.6.3/libpng-1.6.3.ta
> r.xz, attempting MIRRORS if available
> WARNING: QA Issue: linux-mainline: Files/directories were installed but not
> shipped
> /lib/firmware/sb16
> /lib/firmware/korg
> /lib/firmware/sb16/ima_adpcm_init.csp
> /lib/firmware/sb16/ima_adpcm_playback.csp
> /lib/firmware/sb16/mulaw_main.csp
> /lib/firmware/sb16/ima_adpcm_capture.csp
> /lib/firmware/sb16/alaw_main.csp
> /lib/firmware/korg/k1212.dsp
> WARNING: Failed to fetch URL
> http://ftp.gnome.org/pub/GNOME/sources/libbonobo/2.24/libbonobo-2.24.3.tar.bz2
> ;name=archive, attempting MIRRORS if available
> WARNING: Failed to fetch URL
> ftp://pkg-isocodes.alioth.debian.org/pub/pkg-isocodes/iso-codes-1.4.tar.bz2,
> attempting MIRRORS if available
> WARNING: orc-native: No generic license file exists for: orc in any provider
> WARNING: orc: No generic license file exists for: orc in any provider
> WARNING: nss: No generic license file exists for: MPL1.1 in any provider
> WARNING: nss: No generic license file exists for: GPL in any provider
> WARNING: nss: No generic license file exists for: LGPL in any provider
> WARNING: The recipe nss is trying to install files into a shared area when
> those files already exist. Those files and their manifest location are:
>
> /home/bennylima/setup-scripts/build/tmp-angstrom_v2013_12-eglibc/sysroots/beag
> lebone/usr/lib/libssl.a
> Matched in manifest-beaglebone-openssl
> Please verify which package should provide the above files.
> WARNING: Failed to fetch URL
> http://ftp.gnome.org/pub/GNOME/sources/libgnomeui/2.24/libgnomeui-2.24.3.tar.b
> z2;name=archive, attempting MIRRORS if available
> WARNING: Failed to fetch URL
> ftp://ftp.iana.org/tz/releases/tzcode2013d.tar.gz;name=tzcode, attempting
> MIRRORS if available
> WARNING: Failed to fetch URL
> ftp://ftp.iana.org/tz/releases/tzdata2013d.tar.gz;name=tzdata, attempting
> MIRRORS if available
> WARNING: Failed to fetch URL
> http://ftp.gnome.org/pub/GNOME/sources/gnome-icon-theme/2.31/gnome-icon-theme-
> 2.31.0.tar.bz2, attempting MIRRORS if available
> WARNING: Failed to fetch URL
> http://ftp.gnome.org/pub/GNOME/sources/libgdata/0.7/libgdata-0.7.1.tar.bz2;nam
> e=archive, attempting MIRRORS if available
> WARNING: gnome-panel: No generic license file exists for: GFDLv1.1 in any
> provider
> WARNING: Failed to fetch URL
> http://www.kernel.org/pub/linux/bluetooth/openobex-1.5.tar.gz, attempting
> MIRRORS if available
> WARNING: imagemagick: No generic license file exists for: ImageMagick in any
> provider
> WARNING: asio: No generic license file exists for: Boost in any provider
> WARNING: asio: No generic license file exists for: Software in any provider
> WARNING: asio: No generic license file exists for: License in any provider
> WARNING: Failed to fetch URL
> ftp://ftp.debian.org/debian/pool/main/n/netbase/netbase_5.1.tar.gz, attempting
> MIRRORS if available
> WARNING: Failed to fetch URL http://www.xinetd.org/xinetd-2.3.15.tar.gz,
> attempting MIRRORS if available
> WARNING: Failed to fetch URL
> http://ftp.gnome.org/pub/GNOME/sources/gnome-terminal/2.30/gnome-terminal-2.30
> .2.tar.bz2;name=archive, attempting MIRRORS if available
> NOTE: Tasks Summary: Attempted 7057 tasks of which 399 didn't need to be rerun
> and all succeeded.
> NOTE: Writing buildhistory
>
> *** Please tell me who you are.
>
> Run
>
> git config --global user.email "[email protected]"
> git config --global user.name "Your Name"
>
> to set your account's default identity.
> Omit --global to set the identity only in this repository.
>
> fatal: unable to auto-detect email address (got 'bennylima@ubuntu.(none)')
>
> *** Please tell me who you are.
>
> Run
>
> git config --global user.email "[email protected]"
> git config --global user.name "Your Name"
>
> to set your account's default identity.
> Omit --global to set the identity only in this repository.
>
> fatal: unable to auto-detect email address (got 'bennylima@ubuntu.(none)')
>
> Summary: There were 37 WARNING messages shown.
> bennylima@ubuntu:~/setup-scripts$
>
> On Sunday, January 19, 2014 9:53:37 AM UTC-5, blima wrote:
>> Can I see someone's log of a successful build based in the angstrom
>> instructions to make sure I have the interpretation of commands correct?
>>
>> I don't see my previous replies for some reason.
>>
>> I've built the kernel successfully, but gnome image success eludes me.
>>
>> Thanks,
>> Benny
>>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> For more options, visit https://groups.google.com/groups/opt_out.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
