On Thu, Jan 23, 2014 at 6:44 AM, Priyanka_21 <[email protected]> wrote: > > I am trying to install preinstalled Destop image of Ubuntu-12.04 on > BeagleBoard C3 for my Project work as mentioned on the following site > https://wiki.ubuntu.com/ARM/OmapDesktopInstall#OMAP3. > > I have formatted the SD card, It has two partions containing boot files and > root filesystem respectively. > When I plugged the card in to given slot and switched power on and kept the > user button pressed I am getting > the output show in the image file attached. > > There are few lines which seems to be an error to me what do they mean? > Lines are as follows > 1. Unrecognized expansion board: 0 > 2. Wrong Image format for "source" command > > What should I do to avoid these errors?
Those instructions assume booting from the SD card. Your ancient board is still booting from nand. See for hints: http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Good Luck! Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
