For industry product, if you can mount it with read only , you'd better do In some case ,if you need some log or some other information/data need to write to somewhere
work around way , run fsck every boot time .fstab change is enough ? 2014/1/24 Britton Kerin <[email protected]> > On Thu, Jan 23, 2014 at 7:42 PM, liyaoshi <[email protected]> wrote: > > As I know , most eMMC support wear leave , and Micron engineer told me > , > > their firmware support 10 or 12bit BCH ECC every 1024 BYTES > > > > Totally , you can write 10000 (times) x 2G (chip size) on BBB board > right ? > > Theory and practice aren't the same on this one in my experience. > "Industrial" > SD cards claim to have wear leveling, async shutdown tolerance etc. as > well. > Again, it could be something in the Angstrom layer tying itself in knots, > I don't know. > > Britton > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
