Look in the System Reference Manual. Section 8.7. http://www.elinux.org/Beagleboard:BeagleBoneBlack#LATEST_PRODUCTION_FILES_.28A6A.29
Gerald On Tue, Jan 28, 2014 at 2:06 PM, <[email protected]> wrote: > I'm using the BeagleBone Black as the backbone of a graphical display > exercise equipment design. I'm designing an interface board to interface > with the peripherals of my design; the lcd display, exercise equipment... > > I'd like to make my interface board plug directly into the P8 and P9 > connectors much like the ready-made breadboard found here: > http://elinux.org/CircuitCo:BeagleBone_Breadboard#Hardware_Files > > My problem is that I can not find the relative location of those > connectors on the board. Does anyone know of such a drawing or the > location of the P8 and P9 connectors? > > Thanks! > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
