Hi, Wayne, I am experiencing the same issues on my BBB. I've found that promiscuous mode is not supported on AM3359 processors (if you look closely on first link below, there is snip of source code). https://support.criticallink.com/redmine/boards/28/topics/1722 http://e2e.ti.com/support/arm/sitara_arm/f/791/t/266993.aspx
I have to ask you, which external USB-to-Ethernet did you use? br, Milan On Monday, January 6, 2014 11:17:46 PM UTC+1, Wayne Veilleux wrote: > > Hi, > > I"m new to BBB an this is my first post. I recently bought a BBB to > install ntopng (http://www.ntop.org/) on it. Everything compiled well and > ntopng is working properly accept with the eth0 Ethernet port. It is very > strange because all it see is Spanning Tree broadcast and CDP paquets, and > there is a lots of IP trafic on that cable coming from a network tap at > 100Mbps. Very very strange. Everything is working fine with an external > USB-to-Ethernet adapter (eth1) or on the usb0 port. Any ideas what is > causing this ? > > Thanks for any help. > > /Wayne > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
