Hello there,
I connected my BBB to my wifi with an edimax wireless adapter. This works
fine so far, i even got a connection to the internet.
my problem is, I have only access to the BBB by the usb cable. I want so
connect by SSH with the Wifi network.
I guess there's probably a problem with the non static ip adress of my
router because DHCP is activated.
Now I want to connect with Putty to the BBB without an cable connection.
How do i get the Ip adress of the BBB? Is this even possible as i try to do?
maybe this is helpfull
root@beaglebone:~# ifconfig
eth0 Link encap:Ethernet HWaddr 90:59:AF:49:E5:F6
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:56
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:64 errors:0 dropped:0 overruns:0 frame:0
TX packets:64 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4420 (4.3 KiB) TX bytes:4420 (4.3 KiB)
usb0 Link encap:Ethernet HWaddr A6:50:E4:64:B4:AE
inet addr:192.168.7.2 Bcast:192.168.7.3 Mask:255.255.255.252
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:666 errors:0 dropped:0 overruns:0 frame:0
TX packets:180 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:157298 (153.6 KiB) TX bytes:37885 (36.9 KiB)
wlan0 Link encap:Ethernet HWaddr 80:1F:02:D7:B4:4F
inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::821f:2ff:fed7:b44f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:668 errors:0 dropped:0 overruns:0 frame:0
TX packets:75 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:46175 (45.0 KiB) TX bytes:12808 (12.5 KiB)
Thank you very much.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
