On Wed, Feb 12, 2014 at 9:20 AM, <[email protected]> wrote: > > Hi everybody, > I'm running into this strange problem with my beaglebone rev a6 with > Ubuntu: > > I have written a program which periodically writes data on a serial device > attached to the USB port (/dev/ttyUSB0). It runs smoothly for hours and > hours as long as the BeagleBone is connected to an ssh session (either with > the miniUSB/ethernet bridge or with a proper ethernet cable). > > If I disconnect the ssh terminal, the application continues to run for a > while and then idles (no more writes on the serial port) until I re-attach > the ethernet cable/mini usb cable. > > I'm observing the same behavior both with external power and the > beaglebone battery cape. > > any hints/suggestions on where to look for solving this? > > Start looking at the log files; /var/log/.. should give you some hints..
Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
