mega noob question, where can I get the sdk to compile Robert C Nelson kernel?
On Wednesday, 9 January 2013 09:59:11 UTC-6, Alexandre wrote: > > Hi, > > I am trying to put the 10" LVDS LCD from Chalkboard to work with the > beaglebone. I tried the instructions suggested by vendor ( > http://www.chalk-elec.com/?p=1605 ), but so far it didn't work for me... > The LCD works only with Linux image downloaded from vendor site, the same > used to test the LCD before shipping. > > My aim is run an application over Matrix GUI, so I am using the Arago > Linux from TI SDK. I am novice in Embedded Linux and I am following this > guide: http://processors.wiki.ti.com/index.php/AMSDK_Linux_User%27s_Guide. > > Do you know how to apply the patch > "0001-da8xx-fb-add-Chalk-Electronics-LVDS-cape-and-10in-di.patch" over the > kernel Linux (Arago or Angstrom)? > > I've tried the step suggest by Robert C Nelson too (README.md) at > https://github.com/jadonk/kernel/tree/3.7 . > > Maybe everything is OK with kernel (uImage) compiled as suggested by > Robert, but I don't know if is missing something... like a different > uEnv.txt and boot configurations etc. > > I swapped the uImage that comes with the Angstrom by the compiled > (generated with patched kernel for LCD) in the first partition of Angstrom > SD card too but I can't see the Gnome at LCD... > > Is there a specific configuration for uEnv.txt? I added this lines: > > mpurate=1000 > defaultdisplay=dvi > dvimode="1280x800MR-16@60 omapfb.vram=0:8M,1:4M,2:4M" > vram=16M > optargs="consoleblank=0" > > Could you help me? > > Excuse me for disturb you, > > My regards, > > Alexandre > > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
