Yes, you can add the jumper. Yes you can remove the switch to do that. Gerald
On Thu, Feb 13, 2014 at 5:26 PM, <[email protected]> wrote: > I want to run off the microSD by default, partly because I've screwed up > the eMMC, and partly because it's not large enough to hold a Debian Wheezy > image with any logs. > > I plan to mount this unit remotely, and don't want to go there and hold S2 > down so it will boot into my environment on the microSD if the power goes > out and then comes back. Will it work to just blue wire jumper it and > unsolder the switch S2? > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
