From: Randy Merkel <[email protected]> Reply-To: <[email protected]> Date: Tuesday, February 18, 2014 at 4:31 PM To: <[email protected]> Subject: [beagleboard] BBB won't boot with sdCard in place
> Howdy, > > I've been using on board Angstrom on my tethered BBB; rsh and can compile, set > date, etc. Attached ethernet and can rsh from my laptop. Most excellent. > > Picked up a couple of 32B micro SDCards, but BBB won't boot with them > installed: > > 1. Power off, insert FAT32 formated card in slot > 2. Apply power (not trying to boot, no buttons pressed) > 3. Get power LED, and all of the user LEDs lit. Nothiing else happens > > I assumed a power issue from the microUSB (attached to a MAC). Picked up a > AdaFruit 276 1A power supply. Same results: > > * Only power supply and ethernet cable attached: > 1. Boot with no sd card inserted - no problem > 2. Boot with any sd card inserted - all LEDs lit, nothing happens. > > Am I doing something wrong? You need a serial cable attached as a console so that you can see where the boot it is failing. Since the LEDs light up tells us that u-boot is working but little else. We need the console log to see what is wrong. Regards, John > > Suggestions? > > Randy > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
